Siemens SICHARGE UC Operating Instructions Manual page 42

SICHARGE UC Dispenser UL | Operating Instructions
Installing anchors
Using a hammer drill, drill six ¼" holes into the concrete wall. The minimum drill depth is 1 and ¼" deep.
The drill template is shown below:
After drilling the six holes, insert the ¼" stud anchors. These will need to be hammered in.
Loosely install the retaining washer and hex nut on all six anchor studs.
Hanging the dispenser on the wall
With the dispenser wall mount brackets installed to the dispenser, position the studs into the hanging
holes on the mounting bracket. The ¼" washer and hex nut will fit into the larger hole on the mounting
bracket. Once all studs are aligned in the holes, the dispenser can be set down into the smaller slots on
the mounting bracket. To secure the dispenser, apply thread adhesive and torque hex nuts to 4 ft. – lbs.
42