Set The Current Output Limits By Hht; Set The Current Output Limits By Pc - ABB 2600T Pressure Transmitter Series User Manual

364xS User's Manual 39
To set Fail Low current
Navigate the Digital LCD Integral Display menu, select Device config > Output on alarm > Set Fail Current >
Fail Low> Edit, and the value change will be possible. Select the desired value and confirm.
Digital LCD Integral Display Keys sequence to set the Fail Low current: 2 – 4 – 2 – 4 - Edit

Set the Current Output limits by HHT

The setting of the Current Output limits by Hand Held Terminal is available. Please refer to the device
manual for the right operations.

Set the Current Output limits by PC

The setting of the Current Output limits by PC is available using dedicated Software. ABB can provide the
references and the Software. Please refer to the Software instructions for the right operations.
Configuration