Cleaning; Removing Debris - Toro MB TX 2500 Operator's Manual

Cleaning

Removing Debris

Operating the engine with blocked screens, dirty or plugged cooling fins, and/or
cooling shrouds removed, will result in engine damage from overheating.
1. Park the machine on a level surface and shut off the engine. Allow the engine to cool.
2. Unlatch and remove the cowl.
3. Clean any debris from under the hopper.
4. Wipe away debris from the air cleaner.
5. Clean any debris buildup on the engine and in the transmission with a brush or blower.
It is preferable to blow dirt out rather than washing it out. If you use water, keep it
away from electrical items and hydraulic valves.
Do not use a high-pressure washer. High-pressure washing can damage the electrical
system and hydraulic valves or deplete grease.
3451-705A
IMPORTANT
IMPORTANT
Page 5–30 Maintenance: Cleaning