Accessories - Mitsubishi Electric ecodan ECOSLIM150L-PP-MEUK Installation Manual

Accessories

36
Important Note to the installer
The accessory packs described in this booklet are designed for use in conjunction with the Mitsubishi Electric
Pre-Plumbed Slimline Cylinder only. Please read these instructions before commencing installation. Unvented
cylinders are a controlled service as defined in the latest edition of the building regulations and should only be
fitted by a qualified installer.
Only Mitsubishi Electric Accredited Ecodan Installers (AEI) should install these components to the Mitsubishi
®
Electric Pre-Plumbed Slimline Cylinder, Mitsubishi Electric's notes must not be taken as overriding statutory
obligations.
Please Note: Mitsubishi Electric does not therefore accept any responsibility for matters of design, selection or
specification or for the effectiveness of an installation containing one of its products unless specifically requested
to do so at production stage.
All goods are sold subject to the condition of sale
Important Note: Included with the Ecodan product is the Mitsubishi Electric homeowner guarantee registration card.
®
Please use this card to register within 30 days of commissioning (occupation if new build), and ensure the homeowner
benefits from Mitsubishi Electric homeowner 3 year guarantee for the Ecodan heat pump boiler.
®
This needs to be completed by both the Accredited Ecodan ® Installer and the current homeowner (or signatures
of developer if new build). The registration card is free post and is logged by our warranty department. In the unlikely
event of failure of the Ecodan heat pump boiler, return of the card ensures the homeowner's warranty claim is hassle
®
free. For additional supplies of the 3 year guarantee card please contact the heating department on 01707 278666.
Please Note: if you do not complete and return the registration card the product will only be under warranty of 12 months.
Pre-Plumbed Slimline Cylinder Installation Manual
81