Fernox Protector Hp-5C - Mitsubishi Electric ecodan ECOSLIM150L-PP-MEUK Installation Manual

Fernox Protector HP-5c

30
Product Uses
Fernox HP-5c is a concentrated heat transfer fluid capable of frost protection from
-4ºC to -14ºC especially formulated for use in Air Source Heat Pumps and underfloor
heating circuits. Fernox HP-5c also provides long term protection from damage
caused by corrosion, limescale and bacteria and maintains a stable pH across a
range of operational temperatures. Fernox HP- 5c is compatible with all materials
commonly used in Heat Pumps and underfloor heating systems.
•
• Concentrated heat transfer fluid suitable for use in Air Source Heat Pumps
and underfloor heating systems
• Frost protection from -4°C to -14°C
• Protects against corrosion, limescale and bacterial contamination
• Non-toxic
• Compatible with all materials commonly found in Heat Pump and underfloor heating systems
• pH stable
Physical Properties
4
Composition
Application and Dosage
Dilute before use with mains water. In order to ensure adequate corrosion and biocidal protection, the minimum
"in-use" concentration of the product is 10%. Maximum "in-use" concentration is 30%. Upon dilution Fernox HP-5C
will provide frost protection according to the table below:
Concentration
Frost protection level can be checked using a
Fernox Refractometer. Existing heating systems
should be cleaned of sludge and limescale
deposits with a suitable Fernox Heat Pump
Cleaner before adding Fernox HP-5c.
Available from Mitsubishi Electric in the following quantities
Quantity
10 litre
25 litre
•
2 $ #3T #,3T
4
SAP No.
246670
246671
2 $ #3T #,3T
Anaquepus solution of monopropylene glycol with specifically
formulated inhibitors, stabilisers and biocides
< ?
10% 20%
Pre-Plumbed Slimline Cylinder Installation Manual
< ? '
' * $ $ $ Q #
20%
A & #
A & #
* $ $ $ Q # P
P
75