Huawei BTS3900 GSM Commissioning Manual page 32

3 BTS3900 Commissioning Procedure
2.
3.
Step 4 Commission the antenna system.
1.
2.
3.
Step 5 Check the operating status of the BTS3900.
1.
2.
3.
Step 6 Commission the BTS3900 services.
1.
2.
3.
Step 7 Set the environment parameters by referring to
Step 8 Record the commissioning process and the problems in the
Commissioning, and export the commissioning report.
After the commissioning, you should release the site management rights on the Site Maintenance
Terminal System by referring to
----End
3-2
Check whether the transmission between the BBU and the BSC is normal by referring to
6.2 Checking the Transmission Between the BBU and the
Check the consistency between hardware installation and data configuration by referring
to 6.3 Checking the Consistency Between Actual Networking and Data
Configuration.
Measure the VSWR at the antenna port by referring to
Antenna Port.
Check the antenna connection by referring to
Measure the output power of the TRX by referring to
of the TRX.
Check the status of the BTS3900 LEDs by referring to
BTS3900 LEDs.
Check the alarm information of the BTS3900 by referring to
Information of the BTS3900.
Perform the loopback test by referring to
Perform the loopback test of channels by referring to
of a Channel.
Test CS services by referring to
Test PS services by referring to
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
7.2 Checking the Antenna
8.3 Performing the Loopback
9.2 Testing CS Services.
9.3 Testing PS Services.
10.2 Monitoring
Releasing the Site Management
BTS3900 GSM
Commissioning Guide
BSC.
7.1 Measuring the VSWR at the
Connection.
7.3 Measuring the Output Power
8.1 Checking the Status of the
8.2 Checking the Alarm
Test.
9.1 Performing the Loopback Test
Environment.
12 Data Sheet for
Rights.
Issue 03 (2008-07-15)