Advertisement
5. FX/FX-DUO Setup
(1) Connect FX/FX-DUO to the USB port of SX-2000WG+.
Device Connection to SX-2000WG+
If FX/FX-DUO is connected to SX-2000WG+, please do not use a USB hub. Connecting
multiple USB devices is not supported if FX/FX-DUO is connected.
(2) Run "Start"
→"All Programs"→"SX Virtual Link"→"SX Virtual Link".
If window does not appear, click the icon below in the task tray.
(31) Select "Run". (This window may not be shown foreground.)
(3) Click button below.
All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
21
Advertisement
