Advertisement
(7) Click on "Internet Protocol Version 4 (TCP/IPv4)" and select "Properties".
(8) Input the following default parameters, and select "OK".
IP Address
Subnet Mask:
Default Gateway:
IP Address to be used
If you did not use the default parameters for SX-2000WG+, please use the relevant
Select "OK" and close all windows.
parameters. If you are not sure, please ask the network administrator.
All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
192.168.0.2
255.255.255.0
Blank
17
Advertisement
