Kyocera Torque KC-S701 Software Update

Hide thumbs Also See for Torque KC-S701:

Download this manual

Kyocera Torque KC-S701 Software update

We're pleased to inform you that a software update has been released for the

Kyocera Torque (KC-S701) smartphone. The update requires manual

installation, with complete instructions listed below.

Contents of update

Android security updates and improved device stability

Update effective date

September, 2015

Precaution for software update

1. Update requires a Wi-Fi connection.

2. Depending on Wi-Fi connection speed, the update may take several

minutes or more.

3. The phone will be inoperable during the update.

4. Ensure the Wi-Fi network is not overcrowded and provides a stable

connection. Also ensure that the Wi-Fi signal is strong and the phone is not

removed from the Wi-Fi hotspot's coverage area while performing the

update.

5. Ensure the phone's battery is adequately charged to fully complete the

update, as the update will fail if the phone loses power.

6. If the update is canceled or fails for any reason, it can be started again by

repeating the steps below.

Update procedure

1. From the phone's applications menu, tap the icon called 'Settings.'

2. Within 'Settings,' tap 'About phone,' then tap 'Software update.'

3. Tap 'Start Updating software.' When asked to confirm software update,

tap 'OK' to initiate the download.

4. Once the download is complete, tap 'Update now.'

5. The phone will automatically power off and restart, at which point it will

automatically begin installing the software update. Allow the installation to

finish before using the device.

Page 1 Kyocera Torque KC-S701 Software update We’re pleased to inform you that a software update has been released for the Kyocera Torque (KC-S701) smartphone. The update requires manual installation, with complete instructions listed below. Contents of update Android security updates and improved device stability...
Page 2 6. Once installation is complete, a notice of completion will appear on the phone’s status bar (along the top of the display). 7. To confirm that the update was successful, go to the phone’s applications menu and tap ‘Settings,’ then ‘About phone.’ Scroll down to ‘Build number.’ Following a successful update, the ‘Build number’...