Table of Contents
Advertisement
Figure L-15: Attach fittings to isolators
L.5.5
Fit the failsafe mechanism
The following tools and fittings as listed in Table L-5 and as shown in Figure L-16 are
required in order to fit the failsafe mechanism to the support bracket.
Table L-5: Failsafe tools and fittings
Item No.
KAN01056
KAN02009
KAN03010
KAN03012
▪
Attach the parts for the failsafe mechanism to the remaining threaded inserts in the
support bracket as shown in Figure L-17 and tighten with the Allen key.
necessary, use the spanner to tighten the nut (recommended torque is 5 Nm).
MA-005 - Minitrans Installation Manual - Rev 4.5
M6 nut, spring and
flat washers
M6 nut, spring
and flat washers
Description
5 mm Allen key
10 mm spanner
M6 × 40 stainless steel
bolts
M6 nuts
M6 flat washers
M6 spring washers
Large flat
washers
Qty
2
2
2
2
Figure L-16: Failsafe tools and fittings
Note: If
13-Aug-20
Page 62 of 86
Advertisement
Table of Contents
