Fuel System Maintenance; Fuel Line Inspection; Fuel Pump / Filter Inspection - Polaris RANGER 1000 2020 Service Manual

Hide thumbs Also See for RANGER 1000 2020:
Table of Contents

Advertisement

FUEL SYSTEM MAINTENANCE

FUEL LINE INSPECTION

1. Check the quick-connect fitting
fuel pump for signs of wear, deterioration, damage or
leakage. Replace line if necessary.
IMPORTANT
Ensure the quick connector is properly seated and the
latch is fully seated down.
2. Tilt the rear cargo box and check the quick-connect
w
fitting
and fuel line at the fuel rail for signs of wear,
deterioration, damage or leakage. Replace line if
necessary.
3. Ensure fuel lines are properly routed and retained.
Refer to Fuel Line Routing page 5.5.
CAUTION
Ensure lines are not kinked or pinched.
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.

FUEL PUMP / FILTER INSPECTION

The fuel pump assembly
q
and fuel line at the
under the driver's seat. Inspect the exterior of the pump.
Inspect the fuel pump filter only as needed.
pump assembly includes a non-serviceable preliminary
filter
must be replaced as an assembly. Refer to Fuel Pump
q
is located in the fuel tank
NOTICE
The serviceable, high-volume, high-pressure, fuel
w
. If the filter needs to be replaced, the fuel pump
Replacement page 5.19 procedure.
MAINTENANCE
2
2.43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger 1000 2021

Table of Contents