Plasmacluster Ion Generating Unit - Sharp IG-HH1A Operation Manual

CARE AND
MAINTENANCE

Plasmacluster Ion Generating Unit

(electrode section)
Please remove dust from the electrode section with the provided cleaning brush and a cotton swab.
1
Power off and unplug the unit.
wStart maintenance after the main unit is cooled down.
1 Remove the cover by pressing the hook and pulling the
cover towards yourself.
Hook
of unit
2
cover
Clean the electrode section.
Clean it while the unit holder is installed.
Unit cleaning brush
3
1 Insert the unit holder into the main
unit.
4
● Do not touch the electrode section directly. (lead to injury.)
● Do not deform the electrode section. (lead to failures in the unit.)
CAUTION
● Use a cotton swab, and wet it with water if the dirt could not come off easily.
IG-HH1A_0607.indd 17
To replace the Plasmacluster Ion Generating Unit, first
stop the operation, let the main unit to cool completely,
then remove the plug from the power outlet.
(continued)
Unit cleaning brush
(BACK)
El e ctrode secti o n (needl e )
Connection
terminal
Around the root
Electrode section (4 places)
2 Attach the brush to the unit
cover.
E-17
CAUTION
(Or you will get burned, electric shock or wounded.)
About once in every 6 months
(when operated 24 hours a day)
2 Pull out the unit holder following the
direction of the arrow.
Unit holder
For stubborn dirt
Use a cotton swab, and wet it with water
before cleaning.
Before cleaning
3 Attach the unit cover to the main
unit.
Click
Unit cleaning
brush
Unit cover
After cleaning
2017/06/13 13:24:24