Operation - Sharp IG-HH1A Operation Manual

OPERATION

Turn on the main switch at the back of the main unit before starting
the operation.
Start/Stop hot fan operation
1
Main unit
(orange mark)
2
Select your favarite fan speed.
Main unit/Remote controller
FAN SPEED buttons
Main unit
Start/Stop cool fan operation
1
Main unit
(blue mark)
2
Select your favarite fan speed.
(Same procedures as hot fan operation.)
Main unit
IG-HH1A_0607.indd 9
* You cannot
Pip
start the hot fan
operation with the
remote controller.
or
AUTO FAN SPEED button
Remote controller
Pip
Remote controller
Pip
Remote controller
Pip
CAUTION
Do not touch the air outlet and louver during the
hot fan operation.
[Otherwise, it may cause burns]
● Insert the plug into the outlet, turn on the main switch at the
back of the main unit. When first starting the operation or
switching the operation to hot fan operation, the operation
will be in Auto Fan Speed mode.
● The FAN SPEED indicator and the HOT FAN indicator will
turn on.
(The FAN SPEED indicator will be in orange during the hot
fan operation)
Operation panel
● With the Automatic Switch-off Function, the hot fan
operation will stop automatically after 8 hours of
continuous operation.
● 1-6 levels (6 levels of air volume) are available for
selection by pressing the FAN SPEED buttons. To
start the Auto Fan Speed mode, press the AUTO
FAN SPEED button.
● With changing of volume, the FAN SPEED indicator
(orange) will turn on, and the FAN SPEED digital
display will also show the changes.
● When switching off hot fan operation:
All indicators go off
1
Cool fan operation runs for 30 seconds to cool
2
down the inner unit before operation stops.
● Do not unplug the unit before the operation stops.
● Insert the plug into the outlet, turn on the main switch
at the back of the main unit. When first starting the
operation or switching from hot fan operation, the
operation will be in Auto Fan Speed mode.
● The FAN SPEED indicator and the FAN indicator will
turn on.
(The FAN SPEED indicator will be in blue during cool fan
operation)
Operation panel
● 1-6 levels (6 levels of air volume) are available for
selection by pressing the FAN SPEED buttons. To
start the auto fan speed mode, press the AUTO FAN
SPEED button.
● With changing of air volume, the FAN SPEED
indicator (blue) will turn on, and the FAN SPEED
digital display will also show the changes.
E-9
Display panel
See page E-5
Display panel
2017/06/13 13:24:13