ABB COM600 Series Operator's Manual page 15

1MRS756121 COM600 Station Automation Series
Operator's Guide
Figure 3.5.1-1 The substation view to HMI
Alarm and event information
By clicking on the voltage level and bay objects, you can access their specific alarm
lists. To look at a list of events, click on View Events above the Persisting Alarms list.
IED information
By clicking on the IED objects you can view their communication status and information
on diagnostic counters. Below each IED in the substation structure you can click on
Disturbances, Parameters or Measurements to access the corresponding data.
It depends on the IED configuration, whether Disturbances,
Parameters or Measurements are shown in the substation
structure.
COM605 3.1
substation_view.jpg
15