Insertion/Removal Method Of An Sd Memory Card - Mitsubishi Electric MELSEC iQ-R Series User Manual

Insertion/removal method of an SD memory card

Make sure to stop the file access when removing or replacing an SD memory card.
Insertion procedure
(1)
Removal procedure
(3)
1.
Insert an SD memory card (1) straight into the SD memory card slot with
its cutout pointed down.
Make sure it is not uplifted after inserting it.
(2)
If it is inserted insufficiently, it may cause malfunction due to poor contact.
2.
The CARD RDY LED (2) keeps flashing until the SD memory card is
ready to be used. Once the CARD RDY LED (2) turns ON, the SD
memory card can be used.
1.
Press the SD memory card lock switch (1) for one second or longer to
stop the SD memory card access. (Page 52 Method for stopping file
access)
(2)
2.
The CARD RDY LED (2) is flashing while stopping the file access, and it
turns OFF once the processing is completed.
3.
Push the SD memory card (3) in once, and pull it out straight.
(1)
4 PROCEDURES BEFORE OPERATION
4.2 SD Memory Card
4
53