Table of Contents
Advertisement
R250D-E
Hardware Installation and Maintenance Guide
1.2 Indicator Description
LED Indicator
The R250D-E provides only a single indicator, as shown in
Figure 1-2 Indicator
GE1/PoE_OUT
Table 1-2 Indicator description
Type
Default status after
power-on
Issue 01 (2016-09-30)
NOTE
l The R250D-E supports the following power supply modes: PoE power supply and DC power
supply.
l When the device uses the DC power supply, use a power adapter for power supply; otherwise, the
device may be damaged.
GE2
GE3
GE4
Pass Through
NOTE
l The indicator is located inside the panel, which turns on after the AP is powered on.
l Indicator colors may vary slightly at different temperature.
Color
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Indicator
Status
Steady on
1 Product Overview
Figure
1-2.
Description
The AP is just
powered on and the
software is not
started yet.
3
Advertisement
Table of Contents
