Table of Contents
Advertisement
R250D-E
Hardware Installation and Maintenance Guide
2.
3.
4.
5.
Issue 01 (2016-09-30)
Insert a network cable into the GE0/PoE_IN port and a phone cable into the Pass
Through port.
Connect the cables. For details, see
Open the front cover of the device, align screws on both sides with the screw holes in the
86-type box, and use the Phillips screwdriver to tighten the two screws.
Close the cover. If torx security screws are used to prevent theft, use a T9 torx security
screwdriver to tighten the torx security screws into the device.
NOTE
You need to separately prepare the T9 torx security screwdriver.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.6 Cable
Connection.
M4
1N•m
2 AP Installation
ST2.5
0.16N•m
12
Advertisement
Table of Contents
