Download
Share
Print this page
Xterra TR150 Owner's Manual
  1. Manuals
  2. Brands
  3. Xterra Manuals
  4. Treadmill
  5. TR150
  6. Owner's manual

Xterra TR150 Owner's Manual

Hide thumbs Also See for TR150:

Advertisement

Quick Links

FITNESS
TR150 TREADMILL
Owner's Manual
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL

Advertisement

loading
Need help?

Need help?

Do you have a question about the TR150 and is the answer not in the manual?

Questions and answers

Related Manuals for Xterra TR150

Summary of Contents for Xterra TR150

  • Page 1 FITNESS TR150 TREADMILL Owner’s Manual PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS PRODUCT REGISTRATION IMPORTANT SAFETY INSTRUCTIONS IMPORTANT ELECTRICAL INSTRUCTIONS IMPORTANT OPERATION INSTRUCTIONS TR150 ASSEMBLY INSTRUCTIONS OPERATION OF YOUR CONSOLE PROGRAMMABLE FEATURES GENERAL MAINTENANCE TROUBLE SHOOTING MANUFACTURER’S LIMITED WARRANTY ATTENTION THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THIS APPLICATION.
  • Page 4 Congratulations On Your New Treadmill and Welcome to the XTERRA Family! Thank you for your purchase of this quality treadmill from XTERRA. Your new treadmill has been manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available.

  • Page 5: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING This product can expose you to chemicals including Toluene and Acrylamide which are known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Page 6 IMPORTANT ELECTRICAL INFORMATION WARNING NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including the elevation mecha- nism and transport wheels.

  • Page 7: Important Operation Instructions

    • NEVER mount or dismount the treadmill while the belt is moving. XTERRA treadmills start with at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.
  • Page 8 TR150 ASSEMBLY PACK CHECKLIST...
  • Page 9 ASSEMBLY STEP 1 HARDWARE No Hardware required for this step 1. Remove the UNIT from the box and put it on a flat and level floor. ASSEMBLY STEP 2 HARDWARE No Hardware required for this step NOTE: this step may work better with a second person assisting. 1.
  • Page 10 ASSEMBLY STEP 3 HARDWARE 6 Button Head Socket Bolts (87) 4 Flat Washers (79) 2 Curved Washers (88) NOTE: this step may work better with a second person assisting. 1. Insert the UPRIGHTS (L, R)(3,4) into the FRAME BASE (2) with the 6 Button Head Socket BOLTS (87), 4 FLAT WASHERS (79) and 2 CURVED WASHERS (88) using the SCREW DRIVER (104).
  • Page 11 ASSEMBLY STEP 4 HARDWARE No Hardware required for this step NOTE: this step may work better with a second person assisting. 1. Connect the COMPUTER CABLE (UPPER) (37) with the COMPUTER CABLE (MIDDLE)(38).
  • Page 12 ASSEMBLY STEP 5 HARDWARE HARDWARE 6 Button Head Socket (87) 2 Flat Washers (79) 4 Curved Washers (88) 1. Install the CONSOLE SUPPORT (5) into the UPRIGHTS (L,R)(3,4) with the 6 Button Head Socket BOLTS (87), 2 FLAT WASHERS (79) and 4 CURVED WASHERS (88) using the SCREW DRIVER (104).
  • Page 13 CAUTION: Do not attempt to move the unit unless it is in the folded and locked position. Remove the power cord from the front of the unit to avoid possible damage. Use both handrails to maneuver the unit to the desired position. FOLDING INSTRUCTIONS •...
  • Page 14 INCLINE ADJUSTMENT INSTRUCTIONS • Lift the deck up, so that the Adjustment Foot Pad leaves the ground. • Remove the Step-Up Frame Pop Pin. • Select the Incline setting as desired, then insert the Pop pin. Please make sure to adjust both sides to the same level.
  • Page 15 OPERATION OF YOUR TREADMILL TR150 CONSOLE GETTING STARTED Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not operate without it.
  • Page 16 QUICK-START OPERATION 1. Attach the Safety key to enable the display (if not already on). 2. Press the Start key to begin belt movement. Adjust to the desired speed using the Speed p and q keys. You may also use the SPEED buttons 1 through 9 to adjust the speed. 3.

  • Page 17: Programmable Features

    Key: Speed PROGRAMMABLE FEATURES The TR150 Treadmill provides 12 programs (P1,P2,P3……P12). Each program has its specific speed variations. To Select and Start a Preset Program 1. Make sure the machine is in the read mode,. Press Program to choose desired program (P1,P2, …..P12), then press and release Start to begin the program with default values.

  • Page 18: General Maintenance

    GENERAL MAINTENANCE Belt and Deck - Your treadmill uses a very high-efficient low-friction deck. Performance is maximized when the deck is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the area between the frame and 6 - 8” under the belt. This should be done once every other month to extend belt and deck life.
  • Page 19 Adjustments will become less of a maintenance concern as the belt is used. Proper belt tracking is an owner responsibility common with all treadmills. ATTENTION Damage to the running belt resulting from improper tracking / tension adjustments is not covered under the XTERRA warranty.
  • Page 20 BELT/DECK LUBRICATION PROCEDURE First, you want to clean between the belt and deck to remove any debris that may be trapped. Use a clean, non-fraying rag, t-shirt, or light towel. Halfway between the end of the treadmill and motor cover, shove the garment under the belt until you can grasp it on both sides of the belt.
  • Page 21 SERVICE CHECKLIST - DIAGNOSIS GUIDE Before contacting us for aid, please review the following information. It may save you both time and expense. This list includes common problems that may not be covered under the treadmill’s warranty. Problem Meaning Solution/Cause Console Reminder to check 1.

  • Page 22: Manufacturer's Limited Warranty

    Effective November 25, 2019 - TREADMILL LIMITED WARRANTY XTERRA Inc. warrants all its home use treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. XTERRA’s responsibilities include providing new or remanufactured parts, at XTERRA’s option, and technical support to our independent dealers and servicing organizations.
  • Page 23 PREVENTATIVE MAINTENANCE CHART Vacuum Under Motor Cover & Clean & Inspect Deck Lubricate Deck Inspect Belt Tracking Check Wiring for Lubrication (Every 40 hours (Monthly) Adjust if Date (Every Other (Every Other Month) or sooner if dry) necessary Month)
  • Page 24 TR150 Owner’s Manual FITNESS © 2019 All Rights Reserved. Revision: 11.25.2018...
Save PDF