Additional Functions; Flash - Canon HR10 Instruction Manual

}: tso OS
Additional Functions
Flash
You can use the built-in flash to record
still images in dark places. The flash
features the red-eye reduction function.
I 26>
Options + Default value
The flash fires automatically according to the
brightness of the subject,
The flash fires automatically according to the
brightness of the subject, The assist lamp lights
up to reduce the red-eye effect,
Theflashalwaysfires.
The flash does not fire.
x
NEXTV
1
If the joystick guide does not
appear on screen, press (Q) to
display it.
2
Push the joystick (41) toward _.
• If _ does not appear on the
joystick guide, repeatedly push the
joystick (Y) toward [NEXT] to
display it.
• Repeatedly push the joystick (_1)
toward _ to cycle between the
flash modes.
• The display _A disappears after 4
seconds.
3 Press _, first halfway to
activate the autofocus and then
fully to record the still image.
_-_ NOTES
• The practical range of the flash is
approx. 1 to 2 m (3.3 to 6.6 ft.). The
range depends on the recording
conditions.
• The range of the flash decreases in
continuous shooting mode.
• For red-eye reduction to be effective,
the subject needs to look at the assist
lamp. The degree of reduction depends
on the distance and on each individual.
• The flash will not fire in the following
cases:
- When you manually adjust the
exposure in _A (auto) or @ (red-eye
reduction) mode.
- During auto exposure bracketing.
- In the [_'_ FIREWORKS] recording
program.
• The flash mode cannot be selected
when the exposure is locked.
• We recommend not using the flash while
the optional Wide-converter is attached;
its shadow can appear on the screen.
• About the AF-Assist Lamp: While you press
halfway, if the subject is too
78