Canon HR10 Instruction Manual page 122

Add _:iosal _fo mat on
AF System
Minimum Focusing Distance
White Balance
Minimum Illumination
Autlftocus (TTL+ external distance sensor when set tl/(iNSTANT AF]); Manual focus
available
1 rn (3.3 ft.); 1 cm @.39 in,) on rnaxbnurn wide angle
Alto white balance,custom white balance and preset white balance settings:
DAYLIGHT, SHADE,CLOUDY, TUNGSTEN, F LUORESCEN_ F LUORESCENT H
0.2 Ix ({NIGHT}recording program, Shutter speedat 1/2)
3 ix (AUTOmode, Auh/slnw shutter {ON},Shutter speedat 1/30)
Recommended Illumination More than 100 ix
Image Stabilization Optical-Shift Image Stabilizer
1 Recordings made with the {24F PROGH.] f rame rate are converted and recorded on lhe disc as ogi
Memory Card
Recording Media rnb_iSD card2
Size of Still Images 1920 x 108O,2048 x 1536,1440 x 108O,640 x 480 pixels
Simultaneous recording: Movies (16:9) 1920 x 1080, 848 x 480 pixels
Movies (4:3} 1440 x 1080, 640 × 400 pi×els
File Format Designrule t_r Camera File system (DCF),Exit 22 compliant _, DPOFcompliant
Image Compression Method JPEO(compression: Super Fble, Fble,Normal)
2 This camcorder has been tested with miniSD cards up h} 2 GB.Performance cannot beguaranteed for all miniSD cards.
s This camcorder supports Exit 2.2 (also called "Exit Print"). Exit Print is a standard for enhancing the communication between
camcorders and printers. By connecting to an Exit Pdnt-compliant printer, the camcorder's image data at the time nt shooting is
usedand optimized, yielding extremely high qualib/prints.
Input/Output Terminals
AV OUTTerminal lO-pin multiconnector; Output only
Video: 1 Vp-p / 75ohms unbalanced
Audio: 10 dBV (47 kobrn load) / 3 k@m or les,s
USBTerminal rnini-B
COMPONENTOUT Terminal Luminance (Y): 1 Vp-p / 75 ohms
(Proprietary mini-D terminal) Chrolnblallce (PB/PR(CB/CR)): +350 rnVp-p
lOSOi (D3)/ 480i (D1)compatible
HDMI OUTTerminal HDMItype A connector (19 pins}; Output only
122