10 PART NAMES
2)
3)
4)
5)
6)
No.
Name
1)
Module fixing hook
2)
I/O indicator LED
3)
Wire insertion slot
4)
Tool insertion slot
5)
Connection check indicator
6)
Module loading lever
7)
Module fixing screw hole
8)
Metal fitting
10 - 4
Spring clamp terminal block type
1)
7)
8)
Hook used to fix the module to the base unit.
(Single-motion installation)
Used to indicate the I/O status (on/off). The corresponding LED turns on
when the I/O status is on.
Hole inserted a wire to in wiring (Circular hole)
Hole inserted a spring clamp terminal block tool to in wiring (Square hole)
Comes out if a wire is inserted in wiring
Used to load the module into the base unit
Used to fix the module to the base unit.
Do not touch as this may be deformed.
Description
MELSEC-Q
10 - 4