Compliance/Regulatory - Motorola GX2 EA1000C Series User Manual

Compliance/Regulatory

i
Caution
These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not
perform any servicing other than that contained in the Installation and Troubleshooting Instructions unless you are
qualified to do so. Refer all servicing to qualified service personnel.
This is a class I product that contains a class IIIb laser and is intended for operation in a closed
DANGER
environment with fiber attached. Do not look into the optical connector of the transmitter with
power applied. Laser output is invisible, and eye damage can result. Do not defeat safety
features that prevent looking into the optical connector.
This product contains a class IIIb laser and is intended for operation in a closed environment
with fiber attached. Do not look into the optical connector of the transmitter with power
applied. Laser output is invisible, and eye damage can result. Do not defeat safety features
that prevent looking into optical connector.
This symbol indicates that dangerous voltage levels are present within the equipment. These
voltages are not insulated and may be of sufficient strength to cause serious bodily injury when
touched. The symbol may also appear on schematics.
The exclamation point, within an equilateral triangle, is intended to alert the user to the
presence of important installation, servicing, and operating instructions in the documents
accompanying the equipment.
For continued protection against fire, replace all fuses only with fuses having the same
electrical ratings marked at the location of the fuse.
GX2 EA1000C*/* Multi-Wavelength DWDM 1550 nm Laser Transmitter • User Guide
589569-001-a
Compliance/Regulatory
Special Symbols That Might Appear on the Equipment
B
i