Download Print this page

Panasonic Switch-M24eGLPWR+ Manual page 3

Hide thumbs Also See for Switch-M24eGLPWR+:

Advertisement

Model
Switch-M24eGLPWR+
Name
Model
PN28248-SG
No.
5. Hardware Specifications
5-2. Switching mode
5-3. Terminal emulator
connection
5-4. LED display
Date issued
Date revised
Product Specification
Switching method
Switching capacity
Packet transfer capability
MAC Address table
Buffer memory
Flow control
Aging timeout
Jumbo frame supported
Transmittable frames
Console port
Transmission mode
Emulation mode
Communication configuration
(1)POWER(Power)LED
Green Light :Power is ON
Off
(2)STATUS/ECO LED(Status/ECO mode)
Green Light :Operating in status mode.
Green Blink :Operating in ECO mode.
Orange Light:Starting
Orange Blink:Malfunction(Contact the seller)
(3)PoE LIM. LED(PoE limit)
Off Supplying power in the range from 0 to 170 W.
Green Light : Supplying power in the range from 170 to 185 W.
Orange Blink : A single port's power supply is exceeding the upper limit,
(4)FAN LED (Fan sensor)
Green Light : System is operating normally.
Orange Blink : Fan fault is occurring.
(5)TEMP LED (Temperature sensor)
Green Light : The system is normally operating.
Orange Blink : The temperature exceeded the set threshold of the internal
(6)LOOP HISTORY LED (Loop History mode)
Green Light : Operating in Loop History mode.
Green Blink : Loop is occurring, or occurred within the last 3 days.
July 4, 2016
:Store and Forward
:52Gbps
:Non-blocking
Max 1,488,000pps/port(1000Mbps)
Max 148,800pps/port(100Mbps)
Max 14,880pps/port(10Mbps)
:Max 8K entry/unit
Automatic learning can be enabled/disabled
for each port. Fixed registration is enabled.
:512K Byte/unit
:half-duplex Back pressure
full-duplex IEEE802.3x
:10 to 1,000,000 sec. (Default: 300 sec.)
:9KB
:EAP,BPDU
:RJ45 connector 1 port
:RS-232C(ITU-TS V.24)
:VT100
:9,600bps, 8bit, None Parity control,
Stop bit 1 bit
:Power is OFF
All port LEDs(left) are turned off.
or the total power supply of the Switching Hub is exceeding
185 W.
temperature sensor.
Set threshold of the internal temperature sensor: 67℃
(factory default)
Panasonic Eco Solutions Networks Co., Ltd.
401-28248-SG-SP01
Page 3 of 10

Advertisement

loading

This manual is also suitable for:

28248-sg