Cleaning Work - Beko BEKOMAT 12 Original Installation And Operation Manual

BEKOMAT ® 12, 12 CO, 12 CO PN63

10.3.2 Cleaning work

Clean the BEKOMAT using a damp (not dripping wet) cotton cloth or disposable wipe, a cleaning brush and a mild,
®
conventional cleaning agent/soap.
Spray the cleaning agent on a clean cotton cloth or disposable wipe and wipe down the entire component. Then dry
using a clean cloth or let it dry at room temperature.
Carry out the individual cleaning steps as follows:
Illustration
44 | 64
Original installation and operation manual
Description / explanation
1. Clean the control-air bore and condensate discharge
bore using a cleaning brush Ø max. = 2.5 mm (0.09").
2. Clean the control-air cover using a cleaning brush
Ø max. = 2.5 mm (0.09").
3. Clean the upper opening on the core guide pipe using
a cleaning brush Ø max. = 2.5 mm (0.09").
4. Clean the core guide pipe from below using a cleaning
brush or a clean cloth.