Product Overview; Controls - Toro MB TX 2500 Operator's Manual

Product Overview

1. Hopper
2. Hood
3. Control panel

Controls

Become familiar with all the controls
you start the engine and operate the machine.
1. Parking-brake lever
2. Hydraulic-tank cap
3. Hour meter
4. Choke control
5. Key switch
Figure 3
4. Fuel-tank cap
5. Operator platform
6. Track
(Figure 4) before
Figure 4
6. Throttle lever
7. Left motion-control lever
8. Dump switch
9. Right motion-control lever
Parking Brake Lever
To engage the parking brake, pull back the lever.
(Figure 4).
To disengage the parking brake, push the lever
forward.
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure
Choke Control
g038268
Use the choke to start a cold engine. Pull the choke
knob up to engage it. Push the choke knob down to
disengage it (Figure
Key Switch
Use the key switch to start the engine
switch has 3 positions: O
Throttle Lever
The throttle lever is variable between the F
S positions
LOW
Motion-Control Levers
Use the motion-control levers to drive the machine
forward and reverse and to turn either direction
(Figure 4).
Dump Switch
Use the dump switch to dump and lower the hopper.
If you hold the switch down 0.2 to 1.3 seconds, the
hopper fully lowers automatically.
g038269
9
4).
4).
(Figure
, R , and S
FF UN
(Figure 4).
4). The
.
TART
and
AST