Huawei Mate Xs User Manual page 129

If the large display does not support Miracast, connect a wireless HDMI adapter to
•
it. Ensure that the wireless HDMI adapter is connected to a power supply.
To check whether the large display supports Miracast and how to enable wireless
projection on it, consult the user guide or customer service of the large display
manufacturer.
2
On your phone, swipe down from the status bar to open the notification panel, and turn
on .
3
Swipe down again to show all shortcuts and enable Wireless Projection. Your phone will
start searching for available display devices.
You can also go to Settings > More connections > Easy Projection and enable Wireless
projection.
4
In the device list, touch the name corresponding to the large display or wireless HDMI
adapter to complete the projection connection.
After the connection is set up, you can place your phone in landscape mode for a better
display. Incoming call notifications, messages, and clock alarms are only displayed on your
phone. To change the settings, touch
To exit wireless projection, go to
Phone Projection Using a Wired Connection
You can project your phone screen on a large display (for example, a TV) using a wired
connection.
It is recommended that you purchase the accessories from authorized channels.
Projection Using a Type-C Cable
1
Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your large
display.
2
Connect the Type-C end to your phone and the other end to the large display.
and disable Hide notifications.
> Disconnect.
Settings
125