Huawei TP48200A-HT19C4-1 User Manual page 16

Telecom power
Hide thumbs Also See for TP48200A-HT19C4-1:
Table of Contents

Advertisement

TP48200A-HT19C4-1 and TBC300A-TCA2 Telecom
Power
User Manual
Using Ladders
When climbing a ladder, take the following precautions to reduce risks and ensure safety:
Issue 03 (2019-11-15)
Do not drag steel ropes and hoisting tools or bump hoisted objects against hard objects
during hoisting.
Use wooden or fiberglass ladders when you need to perform live working at heights.
When a step ladder is used, ensure that the pull ropes are secured and the ladder is held
firm.
Before using a ladder, check that it is intact and confirm its load bearing capacity. Do not
overload it.
Ensure that the wider end of the ladder is at the bottom, or protective measures have
been taken at the bottom to prevent the ladder from sliding.
Ensure that the ladder is securely positioned. The recommended angle for a ladder
against the floor is 75 degrees, as shown in the following figure. An angle rule can be
used to measure the angle.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tbc300a-tca2

Table of Contents