Master Spas MP Swim Spa Owner's Manual
  1. Manuals
  2. Brands
  3. Master Spas Manuals
  4. Hot Tub
  5. MP Swim Spa
  6. Owner's manual

Master Spas MP Swim Spa Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWN ER ' S MA N UAL
& L I M I T E D W A R R A N T Y
I N T E R N A T I O N A L V E R S I O N

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP Swim Spa and is the answer not in the manual?

Questions and answers

Raini Yeakel
April 14, 2025

Propulsion system powers on but has no power. No warning codes present. Filters are clean

0
1 comments:
Mr. Anderson
April 15, 2025

A possible cause for the propulsion system of a Master Spas MP Swim Spa to power on without any power or warning codes, despite clean filters, could be accidental activation through the touch panel controls. The system may be manually turned on by pressing the “jet” or propulsion control buttons, even if no warnings or errors are displayed.

This answer is automatically generated

0

Related Manuals for Master Spas MP Swim Spa

Summary of Contents for Master Spas MP Swim Spa

  • Page 1 OWN ER ’ S MA N UAL & L I M I T E D W A R R A N T Y I N T E R N A T I O N A L V E R S I O N...
  • Page 2 MASTER SPAS OWNER’S MANUAL Welcome to the Ultimate in Relaxation! Thank you for choosing your new swim spa built by Master Spas. For how-to videos and helpful tips on operating and maintaining your swim spa, please visit www.masterspas.com/resources. Please read the entire Owner’s Manual before installing and using your swim spa. The goal of this manual is to provide you with safety and operational information plus some tips that will help you enjoy your swim spa to its fullest.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Safety Instructions ........................2-10 Regulations ..........................11-13 Compliance ..........................14 VGB Suction Safety & Maintenance Instructions ............... 15-16 Glossary of Spa Terminology ....................17-19 The Advantages of EcoPur Charge ..................20-21 ® Water Chemistry Terms You Should Know ................ 22-23 Why Are Chemicals Important in a Spa ...................

  • Page 4: Safety Instructions

    INTRODUCTION It’s time to relax! You now have your very own portable swim spa by Master Spas. By fully understanding the operation of each of the features of your new Master Spas Swim Spa, you will be assured of many years of hassle-free, hot water therapy and fun.
  • Page 5 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This swim spa is not intended for public/commercial use. When installing and using this electrical equipment, basic safety precautions should be observed including the following: READ AND FOLLOW ALL INSTRUCTIONS WARNING – To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
  • Page 6 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS (CONT.) (For units with GFCI) WARNING – This product is provided with a ground-fault circuit interrupter located on the front panel of selected swim spas and on the power cord of 120 volt convertible spas. The GFCI must be tested before each use. With the product operating, open the service door.
  • Page 7 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS (CONT.) b) Since excessive water temperatures have a high potential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit swim spa water temperatures to 100˚F (38˚C) and duration of use and should also seek medical advice. c) Before entering a swim spa, the user should measure the water temperature with an accurate thermometer since the tolerance of water temperature-regulating devices varies.
  • Page 8 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS (CONT.) DANGER – To reduce the risk of injury to persons, do not remove the suction grate. Suction through drains and skimmers is powerful when the jets in the swim spa are in use. Damaged covers can be hazardous to small children and adults with long hair.
  • Page 9 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS (CONT.) The unit should be subjected to periodic routine maintenance once every quarter to make sure that the it is operating properly. DANGER – Risk of Electric Shock. A green colored terminal or a terminal marked G, GR, Ground, Grounding or the symbol shown in Figure 14.1 of UL 1563 is located inside the supply terminal box or compartment.
  • Page 10 SAFETY INSTRUCTIONS WARNING: CHILDREN SHOULD NOT USE SWIM SPAS OR HOT TUBS WITHOUT ADULT SUPERVISION. AVERTISSEMENT: NE PAS LAISSER LES ENFANTS UTILISER UNE CUVE DE RELAXATION SANS SURVEILLANCE. WARNING: DO NOT USE SWIM SPAS OR HOT TUBS UNLESS ALL SUCTION GUARDS ARE INSTALLED TO PREVENT BODY AND HAIR ENTRAPMENT.
  • Page 11 SAFETY INSTRUCTIONS WARNING: DO NOT USE A SWIM SPA OR HOT TUB IMMEDIATELY FOLLOWING STRENUOUS EXERCISE. AVERTISSEMENT: NE PAS UTILISER UNE CUVE DE RELAXATION IMMÉDIATEMENT APRÉS UN EXERCISE FATIGANT. WARNING: PROLONGED IMMERSION IN A SWIM SPA OR HOT TUB MAY BE INJUROUS TO YOUR HEALTH.
  • Page 12 SAFETY INSTRUCTIONS For swim spas relying on a specific means of egress, such means shall not be removed when the swim spa is in use. DANGER – Risk of Accidental Drowning (especially children under 5 years). Caution shall be exercised to prevent unauthorized access to the swim spa by children. This can be reached by an adult supervisor securing the means of access or installing a safety protection device to the swim spa.

  • Page 13: Regulations

    4.3 of EN17125. The user can only use accessories exclusively provided by the swim spa manufacturer (i.e. Master Spas manufactured insulating cover) for safety reasons (section 6.1 d). Means of access is not provided with the swim spa. Accessories necessary for means of access must meet European standard EN 17125.
  • Page 14 REGULATIONS SAFE USE OF THE SWIM SPA • Encourage all users especially children to learn how to swim. • Learn Basic Life Support (Cardiopulmonary Resuscitation - CPR) and refresh this knowledge regularly. This can make a life-saving difference in the event of an emergency. •...
  • Page 15 • Where an automatic system is installed, periodic checks are still required as per Water Maintenance instructions in this manual. • Master Spas recommends fast dissolving chlorine granules (sodium dichlor). It is not recommended that chlorine tablets and a floater be used.

  • Page 16: Compliance

    COMPLIANCE Relax and rest assured that your Master Spas manufactured swim spa has been built with safety in mind. We manufacture our self-contained swim spas to meet a stringent list of industry standards. Our jetted swim spas comply with the following industry standards: •...

  • Page 17: Vgb Suction Safety & Maintenance Instructions

    VGB SUCTION SAFETY & MAINTENANCE INSTRUCTIONS VGB 2008: WARNING Read and follow all instructions in this manual and on the suction fitting. Failure to follow instructions can cause severe injury and/or death. Failure to remove pressure test plugs and/or plugs used in winterization of the spa/swim spa from the suction outlets can result in an increased potential for suction entrapment.
  • Page 18 This is a mandated regulation and is not part of nor covered by the spa/swim spa warranty. NOTE: Always review entire safety and maintenance information before beginning maintenance. Contact Master Spas for Suction Installation information for complete suction assembly replacement. DO NOT DIVE.

  • Page 19: Glossary Of Spa Terminology

    GLOSSARY OF SWIM SPA TERMINOLOGY Your new swim spa features a variety of jets. All jets, regardless of style, return the water to the swim spa. Air is mixed with the water by using the air controls (if equipped) creating a vigorous massage.
  • Page 20 These are the skirt panels located around all four sides of the swim spa. All of the skirt panels are removable should service be required. Master Spas recommends at least 3 feet of space be provided around the swim spa.
  • Page 21 27. PROPULSION SYSTEM CONTROL PANEL (MP Swim Spa & H2X Challenger Models Only) You may safely control the speed of the propulsion system or variable speed swim jets from the inside of your swim spa by using the touchscreen control panel mounted in the swim area.

  • Page 22: The Advantages Of Ecopur Charge

    ® are protected against the corrosive effects of chlorine. EcoPur Charge Master Core Technology is another exclusive design by Master Spas. FEATURES • Releases Sanitizing Copper & Zinc Oxides • Reduces Water Soluble Heavy Metals •...
  • Page 23 THE ADVANTAGES OF ECOPUR CHARGE ® ECOPUR ® CHARGE INSTALLATION Master Spas Outer Filter* EcoPur ® Charge* STEPS FOR INSTALLATION ® Insert EcoPur Charge in to outer filter. ® Twist EcoPur Charge clockwise to lock in place while holding on to outer filter. When snapped in to locked ®...

  • Page 24: Water Chemistry Terms You Should Know

    WATER CHEMISTRY TERMS YOU SHOULD KNOW Before jumping into Water Maintenance, here are some terms to help you. PARTS PER MILLION (PPM): This is a form of measurement used in most pool or swim spa chemical readings. Best described as any one million like items of equal size and make up, next to one unlike item, but of equal size.
  • Page 25 WATER CHEMISTRY TERMS YOU SHOULD KNOW SANITIZERS: Germs and bacteria enter the water from the environment and the human body; a sanitizer keeps the water balanced and safe to use. Either chlorine or bromine can be used as a sanitizer to create a healthy water environment. A.

  • Page 26: Why Are Chemicals Important In A Spa

    WHY ARE CHEMICALS IMPORTANT IN A SWIM SPA EVAPORATION: As water evaporates, only pure water evaporates, leaving the salts, minerals, metals, and any unused chemicals behind. Adding water adds more salts, minerals, and metals. In time, the water can become saturated with these dissolved solids and can cause stains or scale to form on the walls of the swim spa or a scale build up inside the equipment.

  • Page 27: Recommended Ranges

    WATER MAINTENANCE – RECOMMENDED RANGES WATER CHEMISTRY GUIDE Before treating your water, refer to the Model Specifications section of this manual for the correct gallons of your swim spa, to ensure you are adding the correct amount of chemicals. The concentration of active ingredients in swim spa chemicals varies by manufacturer, so always consult chemical manufacturer's instructions.

  • Page 28: Water Maintenance

    Your swim spa should be filled with fresh tap water using a Pre-filter, which can be obtained from your local Master Spas dealer. This Pre-filter will help remove many of the minerals existing in the water, which will make adjusting the water balance easier after a new fill. Never use more then 50% softened water when filling the swim spa.

  • Page 29: Schedule

    WATER MAINTENANCE – SCHEDULE WATCH HOW-TO VIDEOS: masterspas.com/video-tutorials BEFORE EACH USE Test the swim spa water for proper sanitation levels and adjust accordingly to the proper levels outlined in the Water Chemistry Guide, found in the Water Maintenance – Recommended Ranges section.

  • Page 30: Troubleshooting Guide

    WATER MAINTENANCE – TROUBLE-SHOOTING GUIDE WATCH HOW-TO VIDEOS: masterspas.com/video-tutorials PROBLEM POSSIBLE CAUSES HOW TO FIX IT CHLORINE ODOR Excessive chlorine Shock water with oxidizer/non-chlorine shock treatment Low pH Adjust pH if necessary WATER ODOR Low levels of sanitizer Adjust sanitizer level with chlorinating granules pH out of range Adjust pH if necessary...

  • Page 31: Regular Maintenance Procedures

    • Always use an approved insulating swim spa cover by Master Spas to cover your swim spa when not in use, especially in outdoor installations where the swim spa is exposed to weather conditions and sun.
  • Page 32 REGULAR MAINTENANCE PROCEDURES WATCH HOW-TO VIDEOS: masterspas.com/video-tutorials NOTE: These maintenance procedures are the responsibility of the swim spa owner to perform. These procedures are not covered by the swim spa warranty. CLEANING JETS The majority of jets in your swim spa can individually be turned on/off.
  • Page 33 REGULAR MAINTENANCE PROCEDURES WATCH HOW-TO VIDEOS: masterspas.com/video-tutorials NOTE: These maintenance procedures are the responsibility of the swim spa owner to perform. These procedures are not covered by the swim spa warranty. CARE OF LAMINAR FLOW JETS: In order to keep your Laminar Flow Jets operating properly, follow these steps: 1.
  • Page 34 Do not soak EcoPur® element in a filter cleaner. The EcoPur® element should only be rinsed with fresh, clean water if necessary. Check with your Master Spas dealer for details on cleaning and/or filter replacement recommendations.
  • Page 35 REGULAR MAINTENANCE PROCEDURES WATCH HOW-TO VIDEOS: masterspas.com/video-tutorials NOTE: These maintenance procedures are the responsibility of the swim spa owner to perform. These procedures are not covered by the swim spa warranty. CLEANING THE CLEAR ACRYLIC DIVIDER (Momentum) • The surface should be first flushed with clean water to remove loose abrasive particles. The clear acrylic sheet should then be gently sponged with a mild soap/water solution and finally rinsed with clean water.
  • Page 36 These procedures are not covered by the swim spa warranty. CARE OF STAINLESS STEEL Master Spas uses stainless steel in a number of our swim spas. Its lasting beauty and resistance to corrosion make it an excellent material for handrails and jets faces. With the proper care it will keep its luster for many years.
  • Page 37 Always cover your swim spa when not in use with an approved insulating swim spa cover by Master Spas. Keep the swim spa cover on to minimize heat loss during heating of the swim spa between uses (but not while it is being used). This will greatly reduce energy consumption and will cause swim spa water to heat more rapidly.
  • Page 38 (i.e. cracking and break down in bungee strap material caused by use, water conditions and care). Replacement exercise kits can be purchased through your Master Spas dealer. Failure to follow the above guidelines could result in injury.

  • Page 39: Spa Troubleshooting Guide

    Configuration), be sure to check all breakers for your swim spa. If the swim spa does not respond, or the GFCI breaker continues to trip, contact your local Master Spas dealer or service organization. DO NOT DIVE. DO NOT DIVE.
  • Page 40 6. Reset power to the swim spa at GFCI breaker. 7. If swim spa is still not heating, contact your local Master Spas dealer or service organization. PUMP(S) DO NOT OPERATE 1. Press the “Jets” button on your control panel.

  • Page 41: Winterizing & Storing Your Spa

    However, if you decide you don’t want to use your swim spa in the winter, you must drain it and follow the winterizing steps listed below.* DISCLAIMER: Master Spas does not recommend winterizing your swim spa. If you choose to do so, any damage that may result is not covered under the swim spa warranty.

  • Page 42: Model Specifications

    MODEL SPECIFICATIONS DO NOT DIVE.

  • Page 43: Installation Instructions

    Swim spa installation is simple when properly planned. It is important that you read the following information carefully and consult with your Master Spas dealer. 1. ACCESS: The actual dimensions of your new swim spa will determine the amount of space that is needed in moving the swim spa from curbside to its final installation area.
  • Page 44 GUIDELINES FOR PARTIALLY OR FULLY RECESSED INSTALLATION Swim spas manufactured by Master Spas are designed to be installed in a variety of settings. One of which is installing below grade. Should a swim spa be installed below the level of the site drainage system (below grade), a system for preventing water collecting and pooling must be designed based on the requirements of the local authority having jurisdiction.
  • Page 45 SITE PREPARATION / GENERAL GUIDELINES DO NOT DIVE. DO NOT DIVE.

  • Page 46: Electrical Requirements

    (IT) or TN-C grounding. Be sure to have a licensed electrician examine and ensure proper grounding is provided. See chart on next page for wire size conversion. All Master Spas equipment packs are wired for 230 VAC only. The only electrical supply for your swim spa must include a switch or circuit breaker to open all non-grounded supply conductors to comply with BS7671 (or other local jurisdiction code or law).
  • Page 47 ELECTRICAL REQUIREMENTS 230 VOLT 50 HZ – RESIDUAL CURRENT DEVICES (RCDS) A residual current device (RCD) is the generic term for a device that monitors the current in the line conductor and the neutral conductor in an earthed system. In a circuit that’s operating properly, the vector sum of the live and neutral current values added together will be zero.
  • Page 48 ELECTRICAL REQUIREMENTS MS40E/MS81SPAE HOOK-UP AS MANUFACTURED – SINGLE SERVICE (Figure 1) Single Service, TN and TT Electrical Systems (1x16 Amp or 1x32 Amp)* 3 Wires (1 Line + 1 Neutral + 1 Protective Earth). Protective Earth wire (Green/Yellow) must be connected to system ground terminal as marked.
  • Page 49 ELECTRICAL REQUIREMENTS MS40E/MS81SPAE HOOK-UP OPTIONAL CONFIGURATION – 3 SERVICE/PHASE (Figure 2) 3-Phase Service, TN and TT Electrical Systems 5 Wires (3 Lines + 1 Neutral + 1 Protective Earth)*. Protective Earth wire (Green/Yellow) must be connected to system ground terminal as marked. –...
  • Page 50 ELECTRICAL REQUIREMENTS MS50E HOOK-UP AS MANUFACTURED – SINGLE SERVICE (Figure 1) Single Service, TN and TT Electrical Systems (1x16 Amp or 1x32 Amp)* 3 Wires (1 Line + 1 Neutral + 1 Protective Earth). Protective Earth wire (Green/Yellow) must be connected to system ground terminal as marked.
  • Page 51 ELECTRICAL REQUIREMENTS MS6013XE HOOK-UP AS MANUFACTURED – SINGLE SERVICE (Figure 1) Single Service, TN and TT Electrical Systems (1x16 Amp or 1x32 Amp)* 3 Wires (1 Line + 1 Neutral + 1 Protective Earth). Protective Earth wire (Green/Yellow) must be connected to system ground terminal as marked.
  • Page 52 ELECTRICAL REQUIREMENTS MS6013XE HOOK-UP OPTIONAL CONFIGURATION – 3 SERVICE/PHASE (Figure 3) 3-Phase Service, TN and TT Electrical Systems 5 Wires (3 Lines + 1 Neutral + 1 Protective Earth)*. Protective Earth wire (Green/Yellow) must be connected to system ground terminal as marked. –...

  • Page 53: Initial Swim Spa Setup

    Put swim spa in final position that allows for access to equipment and swim spa components. Master Spas recommends that at least 3 feet of space be provided around all sides of the swim spa for access. This provides adequate space for regular maintenance and service.
  • Page 54 Due to the nature of water flow and hydro-therapy pumps, please be advised that air locking of pumps may occur. Master Spas has taken measures to reduce the possibility of this, but it still may occur, especially after refilling a swim spa. This is not a service covered under warranty and service charges may apply.

  • Page 55: Operating Instructions

    SWIM SPA CONTROLS - ICON SPA TOUCH THE MAIN SCREEN 5:29 pm 5:29 pm 5:29 pm DO NOT DIVE. DO NOT DIVE.
  • Page 56 SWIM SPA CONTROLS - ICON SPA TOUCH THE MAIN SCREEN         5:29 pm          SWIM SPA STATUS Important information about swim spa operation can be seen on the Main Screen. Various features and main menus can be accessed from this screen.
  • Page 57 SWIM SPA CONTROLS - ICON SPA TOUCH THE MAIN SCREEN ICON SPECIFICATIONS = High Temperature Range = Low Temperature Range = Ready Mode = Ready And Rest Mode = Rest Mode = Filter1 Mode = Filter2 Mode = Filter1 and 2 Mode = Ozone is Running.
  • Page 58 SWIM SPA CONTROLS - ICON SPA TOUCH THE MAIN SCREEN ICON SPECIFICATIONS = Swim Spa Equipment Control Icon. Brings up a screen where the swim spa jets or other equipment can be controlled. While on the Swim Spa Equipment Screen, you can press a Jets button once for low speed, and if applicable, press it again for high speed.
  • Page 59 SWIM SPA CONTROLS - ICON SPA TOUCH THE MAIN SCREEN MESSAGES At the bottom of the screen, at certain times an indicator may appear showing that a message is waiting. Touch this indicator to go to the Message Display Screen. On that Screen some of the messages can be dismissed.
  • Page 60 SWIM SPA CONTROLS - ICON SPA TOUCH THE SET TEMPERATURE AND LIGHTS 5:29 pm Adjusts Set Temperature Adjusts Set Temperature Down SET TEMPERATURE Press Up or Down once to display the Set Temperature (indicated by a flashing ºF or ºC). Press Up or Down again to modify the Set Temperature.
  • Page 61 SWIM SPA CONTROLS - ICON SPA TOUCH THE SPA SCREEN ALL EQUIPMENT ACCESS The Swim Spa Equipment Icon takes you to the Spa Screen, which shows all available equipment* to control. The display shows icons that are related to the equipment installed on a particular swim spa model, so this screen may change depending on the installation.
  • Page 62 SWIM SPA CONTROLS - ICON SPA TOUCH COMMON BUTTONS VALUES INCREMENT/DECREMENT If an Up or Down button is shown and pressed when on an editing page, and a value has been selected (highlighted), the value can be increased by pressing the Up Arrow or decreased by pressing the Down Arrow.
  • Page 63 SWIM SPA CONTROLS - ICON SPA TOUCH COMMON BUTTONS EXITING SCREENS The Back button is on every screen except the Main Screen, the Priming Mode Screen and Message Display Screen. When you see only this button, or this button plus an Inactive Save Button, it means Back or Exit. It appears on editing screens before you have changed any value, as well as on all other screens.
  • Page 64 SWIM SPA CONTROLS - ICON SPA TOUCH COMMON BUTTONS PAGE RIGHT/LEFT If there is a Right Arrow at the bottom of the screen, it takes you to the next page. If there is a Left Arrow at the bottom of the screen, it takes you to the previous page. Settings Settings Heat...
  • Page 65 SWIM SPA CONTROLS - ICON SPA TOUCH THE SETTINGS SCREEN PROGRAMMING, ETC. The Settings Icon takes you to the Settings Screen, where all programming and other swim spa behaviors are controlled. Each icon on the Settings screen takes you to Settings a different screen, where one or more settings may be viewed and/or edited.
  • Page 66 SWIM SPA CONTROLS - ICON SPA TOUCH THE SETTINGS SCREEN HEAT MODE – READY VS. REST In order for the swim spa to heat, a pump needs to circulate water through the heater. The pump that performs this function is known as the “heater pump”. The heater pump can be either a 2-speed Pump (Pump 1) or a Circulation Pump.
  • Page 67 SWIM SPA CONTROLS - ICON SPA TOUCH FILL IT UP! PREPARATION AND FILLING Fill the swim spa to its correct operating level, using the instructions found in Initial Swim Spa Setup under the Installation Instructions section. PRIMING MODE – M019* After the initial start-up sequence, the control will enter Priming Mode and display a Priming Mode screen.
  • Page 68 SWIM SPA CONTROLS - ICON SPA TOUCH SWIM SPA BEHAVIOR PUMPS On the Spa Screen, select a “Jets” button once to turn the pump on or off, and to shift between low- and high-speeds if equipped. If left running, the pump will turn off after a time-out period (15 minutes at high speed).
  • Page 69 SWIM SPA CONTROLS - ICON SPA TOUCH SWIM SPA BEHAVIOR FREEZE PROTECTION If the temperature sensors within the heater detect a low enough temperature, then the pumps automatically activate to provide freeze protection. The pumps will run either continuously or periodically depending on conditions.
  • Page 70 SWIM SPA CONTROLS - ICON SPA TOUCH TIME-OF-DAY SETTING THE TIME-OF-DAY Be sure to set the time-of-day, it is important for determining filtration times and other background features. The Time Icon on the Settings Screen takes you to a screen where you control the Time-of-Day. On the Time-of-Day screen, use the Up and Down Buttons to make changes to the highlighted green field.
  • Page 71 SWIM SPA CONTROLS - ICON SPA TOUCH ADJUSTING FILTRATION MAIN FILTRATION Using similar adjustments as the Time-of-Day Screen on previous page, Filter Cycles are set using a start time and an end time. Each setting can be adjusted in 15-minute increments. The panel calculates the duration and displays it automatically.
  • Page 72 SWIM SPA CONTROLS - ICON SPA TOUCH ADJUSTING FILTRATION PURGE CYCLES In order to maintain sanitary conditions, as well as protect against freezing, all pumps will purge water from their respective plumbing by running briefly at the beginning of each filter cycle. It is best that all jets be left in their open position and water diverters in their centered positions when done using the swim spa so all jets get water flow during purge cycles.
  • Page 73 SWIM SPA CONTROLS - ICON SPA TOUCH RESTRICTING OPERATION The control can be restricted to prevent unwanted use or temperature adjustments. Locking the Panel prevents the control panel from being used, but all automatic functions are still active. Locking the Settings allows Jets and other features to be used, but the Set Temperature and other programmed settings cannot be adjusted.
  • Page 74 SWIM SPA CONTROLS - ICON SPA TOUCH ADDITIONAL SETTINGS HOLD - M037* The Hold Icon on the Settings Screen places the swim spa in Hold Mode and displays the System Hold screen. Hold Mode is used to disable the swim spa equipment during service functions like cleaning or replacing the filter.
  • Page 75 SWIM SPA CONTROLS - ICON SPA TOUCH THE UTILITIES SCREEN UTILITIES Utilities The Utilities Icon in the Settings Screen takes you to the Utilities Screen. The Utilities Screen may contain the following: PANEL Panel Messages Allows you to set the time that the screen goes to sleep after so many minutes of inactivity.
  • Page 76 SWIM SPA CONTROLS - ICON SPA TOUCH ADDITIONAL SETTINGS UNITS The Units Icon on the Settings Screen takes you to the Units Screen. Press “Temp Display” to change the temperature between Fahrenheit and Celsius. Press “Time Display“ to change the clock between 12 HR and 24 HR display. Units Temp Display °F...
  • Page 77 SWIM SPA CONTROLS - ICON SPA TOUCH ADDITIONAL SETTINGS CLEANUP CYCLE Cleanup Cycle Duration is not always enabled, so it may not appear. When it is available, set the length of time the heat/filter pump will run after each use. 0-4 hours are available. Setting to 0.0 Hr prevents the Cleanup Cycles from running.
  • Page 78 SWIM SPA CONTROLS - ICON SPA TOUCH INFORMATION SYSTEM INFORMATION The Information Icon on the Settings Screen takes you to the System Information screen, which displays various settings and system identification. System Information Cleanup Cycle Off Filtration Ozone Heat Mode Rest Spa State Running...
  • Page 79 SWIM SPA CONTROLS - ICON SPA TOUCH UTILITIES – GFCI TEST FEATURE The Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD) is an important safety device and is required equipment on a swim spa installation. GFCI Test GFCI Status - Armed Test Reset FORCING THE GFCI TRIP TEST (North America Only)
  • Page 80 SWIM SPA CONTROLS - ICON SPA TOUCH GENERAL MESSAGES MESSAGES Most messages and alerts will appear at the bottom of the Main Screen. Several alerts and messages may be displayed in a sequence. WATER TEMPERATURE IS UNKNOWN After the pump has been running for 1 minute, the temperature will be displayed. POSSIBLE FREEZING CONDITION Warning A potential freeze condition has been detected,...
  • Page 81 SWIM SPA CONTROLS - ICON SPA TOUCH HEATER-RELATED MESSAGES THE WATER FLOW IS LOW – M016** There may not be enough water flow through the heater to carry the heat away from the heating element. Heater start up will begin again after about 1 min. See “Flow Related Checks” below. THE WATER FLOW HAS FAILED* –...
  • Page 82 SENSOR-RELATED MESSAGES SENSORS ARE OUT OF SYNC – M015** The temperature sensors MAY be out of sync by 3°F (1°C). Contact your Master Spas dealer or service organization if this message does not disappear within a few minutes. SENSORS ARE OUT OF SYNC – CALL FOR SERVICE* – M026** The temperature sensors ARE out of sync.
  • Page 83 (operation program). Contact your Master Spas dealer or service organization. THE SETTINGS HAVE BEEN RESET (PERSISTENT MEMORY ERROR)* – M021** Contact your Master Spas dealer or service organization if this message appears on more than one power-up. THE CLOCK HAS FAILED* – M020** Contact your Master Spas dealer or service organization.
  • Page 84 SWIM SPA CONTROLS - ICON SPA TOUCH REMINDER MESSAGES REMINDER MESSAGES OF ROUTINE MAINTENANCE Reminder Messages can be turned off by using the Reminders Screen. Reminders are preprogrammed routine maintenance reminders that appear on the Main Screen as at different intervals and will help guide you in taking care of your swim spa. Some messages may not apply depending on the actual equipment in the swim spa.
  • Page 85 SWIM SPA CONTROLS - ICON SPA TOUCH REMINDER MESSAGES CLEAN THE COVER May appear on a regular schedule, i.e. every 30 days. Vinyl covers should be cleaned and conditioned for maximum life. TREAT THE WOOD May appear on a regular schedule, i.e. every 180 days. Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for maximum life.

  • Page 86: Spa Controls - Pump Diagrams

    SWIM SPA CONTROLS - PUMP CONTROL DIAGRAM INT MP FORCE & MP FORCE D DO NOT DIVE.
  • Page 87 SWIM SPA CONTROLS - PUMP CONTROL DIAGRAM INT MP SIGNATURE DO NOT DIVE.
  • Page 88 SWIM SPA CONTROLS - PUMP CONTROL DIAGRAM INT MP MOMENTUM 80 & MP MOMENTUM 80 D DO NOT DIVE.

  • Page 89: Propulsion System Controls

    This propulsion system is controlled by the revolutionary Swim Number System. Along with this, your MP Swim Spa is equipped with a WiFi module which allows control of the system through our Swim Number App (SNAPP)*. SNAPP is available for iPad on the Apple store and allows you to build your own personal workouts.
  • Page 90 PROPULSION SYSTEM CONTROLS SWIM CONTROL OPERATION   SwimNumber System 100˚F 12:45 pm  Swim SWIM NUMBER   USER   Michael LOCK APP SMART WORKOUT   Morning  START  DURATION ELAPSED TIME STEP IN CYCLE  ...
  • Page 91 PROPULSION SYSTEM CONTROLS BEGINNER FITNESS WORKOUT - 9 MIN. 30 SEC. DO NOT DIVE. DO NOT DIVE.
  • Page 92 PROPULSION SYSTEM CONTROLS INTERMEDIATE FITNESS WORKOUT - 15 MIN. 15 SEC. DO NOT DIVE. DO NOT DIVE.
  • Page 93 PROPULSION SYSTEM CONTROLS ADVANCED FITNESS WORKOUT - 27 MIN. DO NOT DIVE. DO NOT DIVE.
  • Page 94 PROPULSION SYSTEM CONTROLS BEGINNER TRAINING WORKOUT - 15 MIN. DO NOT DIVE. DO NOT DIVE.
  • Page 95 PROPULSION SYSTEM CONTROLS INTERMEDIATE TRAINING WORKOUT - 30 MIN. DO NOT DIVE. DO NOT DIVE.
  • Page 96 PROPULSION SYSTEM CONTROLS ADVANCED TRAINING WORKOUT - 45 MIN. DO NOT DIVE. DO NOT DIVE.
  • Page 97 PROPULSION SYSTEM CONTROLS BEGINNER SWIM WORKOUT - 25 MIN. DO NOT DIVE. DO NOT DIVE.
  • Page 98 PROPULSION SYSTEM CONTROLS INTERMEDIATE SWIM WORKOUT - 25 MIN. 30 SEC. DO NOT DIVE. DO NOT DIVE.
  • Page 99 PROPULSION SYSTEM CONTROLS ADVANCED SWIM WORKOUT - 41 MIN. DO NOT DIVE. DO NOT DIVE.

  • Page 100: Propulsion System Technical Information

    CRITICAL REPLACEMENT COMPONENT PART NUMBERS: WARNING: Items listed below shall only be replaced with identical components unless approved by Master Spas Engineering Department. Any change or alteration to the system components will cause a safety hazard and void the safety certification.

  • Page 101: Fusion Air Sound System (If Equipped)

    FUSION AIR SOUND SYSTEM (IF EQUIPPED) REMOTE CONTROL POWER & SYNCING WARNING – Never remain in your swim spa longer than 15 minutes per session when the water temperature is above 98˚F. If you wish to spend more time in your swim spa, whether enjoying music, or just lounging, be sure to keep the swim spa water at or below body temperature (98.6˚F).
  • Page 102 FUSION AIR SOUND SYSTEM (IF EQUIPPED) EXPLANATION OF CONTROLS STEREO OUTPUTS Internal stereo module has capabilities for Bluetooth, FM Radio, AUX and USB. There is no external capabilities for AUX and USB. For this reason, these inputs will not be applicable when seen on remote. Simply use Mode to rotate back to either Bluetooth input or FM.
  • Page 103 FUSION AIR SOUND SYSTEM (IF EQUIPPED) LISTENING TO DEVICES PAIR WITH BLUETOOTH DEVICE Switch on your Bluetooth device. Select ‘AQUATIC AV’ from the list of available devices to pair (no password is needed). LISTENING VIA BLUETOOTH DEVICE MODE Bluetooth mode will be activated once a Bluetooth device is paired in any mode. Use PAIR (MODE) to change to the Bluetooth mode to listen to music.
  • Page 104 FUSION AIR SOUND SYSTEM (IF EQUIPPED) LISTENING TO DEVICES ENTER FM RADIO MODE MODE Press (MODE) on the remote control to switch to FM radio mode. PAIR Press (PLAY/PAUSE) to mute or unmute the audio. If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD.
  • Page 105 FUSION AIR SOUND SYSTEM (IF EQUIPPED) ADDITIONAL FEATURES AUDIO MENU The BlueCube+ Media Player is equipped with an audio DSP (Digital Signal Processor) to provide preset listening experiences for different music types. To enter audio menu, press (AUDIO) button once on AUDIO the remote control.

  • Page 106: Wave Lighting (If Equipped)

    WAVE LIGHTING (IF EQUIPPED) Set into a decorative SoftTread insert, this laser LED light provides a warm and inviting glow to the exterior of your swim spa at night and looks great as part of your backyard design. The Wave Light Package is available for most deep swim spa models.

  • Page 107: Mast3Rpur Tm (If Equipped)

    (IF EQUIPPED) NOTE: This regular maintenance for the Mast3rPur system is not covered under the warranty of the swim spa. Your Master Spas dealer or service organization can be contacted to schedule this maintenance. WARNING – BEFORE PERFORMING ANY MAINTENANCE ON THE MAST3RPUR SYSTEM, MAKE SURE THE SWIM SPA IS SHUT DOWN.
  • Page 108 MAST3RPUR (IF EQUIPPED) INSTALLING THE UV LAMP Make sure to handle the new lamp by the ceramic endcaps and clean the UV Lamp before installation if needed. Slowly place the UV Lamp into the Lamp Retainer until the top of the UV Lamp is pushed past the tabs on the Lamp Retainer.
  • Page 109 Install the UV Lamp as described in the “Installing the UV Lamp” instructions. Reinstall the Upper Enclosure Assembly to the Enclosure Base. The unit is now ready for normal operation. Contact your Master Spas dealer for replacement Mast3rPur parts and scheduling service for this regular maintenance.

  • Page 110: Softtread Tm Floor System By Swimdek (If Equipped)

    The exclusive SoftTread Nonslip Comfort Floor System by SwimDek is available as a premium option on swim spas manufactured by Master Spas to provide better grip, traction and comfort on both the steps and floor of the swim spa. Making our swim spas as safe and easy as possible to use while getting in, out, or exercising.

  • Page 111: International Limited Warranty

    Wave control panel and motor) will not malfunction due to defects in material and workmanship for a period of 3 years from the date of the original retail purchase. Master Spas will repair or replace the applicable components, including labor to install (parts and labor).
  • Page 112 1 YEAR - LED LIGHT SYSTEM* Master Spas warrants to the original retail purchaser, for a period of 1 year from the date of original retail purchase that the optional, factory installed LED light system will not malfunction due to defects in workmanship and materials (parts).
  • Page 113 Master Spas Owner’s Manual, an act of God, weather conditions or other damage from causes beyond the control of Master Spas. Misuse or abuse shall mean operation of the swim spa other than in conformity with the Master Spas Owner’s Manual.
  • Page 114 The original retail purchaser should register their swim spa purchase within 10 days from the date of original retail purchase to establish proof of purchase with Master Spas. Failure to register does not void this limited warranty but, upon any warranty claim, proof of purchase must first be provided to confirm original retail purchase date to the original retail purchaser.

  • Page 115: Swim Spa Care & Maintenance Record

    SWIM SPA CARE AND MAINTENANCE RECORD MAINTENANCE AVERAGE TIMETABLES Below is a list of routine maintenance and the guidelines on how often they should be done. The frequency in which these actions should be performed may vary depending on bather load and how often you use your swim spa.
  • Page 116 Your dealer is an independent businessperson or company and not an employee or agent of Master Spas, LLC. We cannot and do not accept any responsibility or liability for any other representations, statements or contracts made by any dealer beyond the provisions of our written limited warranty. Master Spas, Master Blaster, and EcoPur are registered trademarks of Master Spas, LLC.

This manual is also suitable for:

H2x challengerInt mp forceInt mp force dInt mp signature dInt mp momentum 80Int mp momentum 80 d

Table of Contents