Mitsubishi Electric City Multi PMFY Series Technical & Service Manual page 7

The main display can be displayed in two different modes: "Full" and "Basic".
The factory setting is "Full". To switch to the "Basic" mode, change the setting on the Main display setting.
<Full mode>
* All icons are displayed for explanation.
Cool
Mode
Operation mode
Indoor unit operation mode appears here.
Preset temperature
Preset temperature appears here.
Clock (See the Installation Manual.)
Cool
Current time appears here.
Fan speed
Fan speed setting appears here.
Mode
Button function guide
Functions of the corresponding buttons appear here.
Appears when the ON/OFF operation is centrally controlled.
Appears when the operation mode is centrally controlled.
Appears when the preset temperature is centrally controlled.
Appears when the filter reset function is centrally controlled.
Indicates when filter needs maintenance.
Room temperature
(See the Installation Manual.)
Current room temperature appears here.
Most settings (except ON / OFF, mode, fan speed, temperature) can be made from the Menu screen.
OC307F
Room
Set temp.
Auto
Temp. Fan
Set temp. Auto
Temp. Fan
Cool
Mode
<Basic mode>
Fri
Cool
Mode
Appears when the buttons are locked.
Fri
Appears when the On/Off timer or Night setback function is
enabled.
Appears when the Weekly timer is enabled.
Appears while the units are operated in the energy-save
mode.
Appears when the built-in thermistor on the remote control-
ler is activated to monitor the room temperature.
appears when the thermistor on the indoor unit is acti-
vated to monitor the room temperature.
Indicates the vane setting.
Indicates the louver setting.
Indicates the ventilation setting.
Appears when the preset temperature range is restricted.
7
Room
Set temp.
Auto
Temp. Fan
Set temp. Auto
Temp. Fan
Fri