Problem
The engine overheats.
The tractor does not drive.
Possible Causes
1. The engine load is excessive.
2. The oil level in the crankcase is
low.
3. The cooling fins and air
passages under the engine
blower housing are plugged.
1. The drive control is in the Push
position.
2. The traction belt is worn, loose,
or broken.
3. The traction belt is off of the
pulley.
31
Corrective Action
1. Shift into lower gear to reduce
ground speed.
2. Add oil to the crankcase.
3. Remove the obstruction from
the cooling fins and air
passages.
1. Move the drive control to the
Operate position.
2. Contact an Authorized Service
Dealer.
3. Contact an Authorized Service
Dealer.