Servicing The Spark Plug - Toro 71233 Operator's Manual

Indy special edition lawn tractor

Hide thumbs Also See for 71233:

Operator's manual (32 pages)

Table Of Contents

Table of Contents

7. Carefully slide the paper element and foam element

from the blower housing (Fig. 18).

Figure 18

1. Paper element

2. Foam element

3. Air cleaner cover

Cleaning the Foam and Paper Elements

Foam Element:

1. Wash the foam element in liquid soap and warm water.

When the element is clean, rinse it thoroughly.

2. Dry the element by squeezing it in a clean cloth. Do not

oil the element.

Important

Replace the foam element if it is torn or

worn.

Paper Element:

1. Lightly tap the element on a flat surface to remove dust

and dirt.

2. Carefully clean the rubber seal on the paper element to

prevent debris from entering the engine.

3. Inspect the element for tears, an oily film, and damage

to the rubber seal.

Important

Never clean the paper element with

pressurized air or liquids, such as solvent, gas, or kerosene.

Replace the paper element if it is damaged or cannot be

cleaned thoroughly.

Installing the Foam and Paper Elements

Important

To prevent engine damage, always operate

the engine with the complete foam and paper air cleaner

assembly installed.

1. Place the foam element and paper element into the

blower housing.

4. Tab

5. Slot

Note: Ensure that the rubber seal is flat against the air

cleaner base.

2. Align the tabs on the air cleaner cover with the slots of

the blower housing (Fig. 18). Hook the handle onto the

cover and press down on the handle to lock the cover in

place.

3. Close the hood.