Lubrication; Greasing The Sprayer - Toro 41177 Operator's Manual

Lubrication

Greasing the Sprayer

Service Interval: Every 50 hours—Lubricate the pump.
Every 100 hours/Yearly (whichever
comes first)—Lubricate all grease
fittings.
Grease Type: No. 2 General Purpose Lithium Base
Grease
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe off excess grease.
The grease fittings positions are illustrated by the
following: Figure 38 through Figure 43.
Figure 37
Pump (Do not over grease)
1. Grease point
At the wheels, three on each side
1. Grease point
1. Grease point
Pump drive, four, one each side
1. Grease point
41
Figure 38
Figure 39
Steering rods
Figure 40