Table of Contents
Advertisement
setup screen
7. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
• E-mail : Specify the use of email transfer in the alarm input setup.
• Record : Specify the use of recording in the alarm input setup.
• Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
8. When done, click [apply (
time schedule
You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1. From the Setup menu, select the
<event (
2. Click <event setup>.
3. Select <time schedule> from <event
action setup>.
4. Set whether or not to <enable>.
5. Specify the <transfer interval>.
6. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Alarm input".
(page 89)
The transfer interval setting value must be
`
J
smaller than the preset activation interval to succeed in image transmission.
7. When done, click [apply (
90_ setup screen
)> tab.
)].
)].
Advertisement
Table of Contents
