Table of Contents
Advertisement
installing the camera unit
1. Using the two screws provided or removing the
double sided tape protector below the camera
header bracket, install the header bracket.
2. Make sure that [top] shown in the lens head is
faced upward, and then push the bracket in.
3. Considering the direction of monitoring, adjust
the lens to make it face the desired direction.
4. Fasten the screw next to the bracket and fix the
lens direction.
5. After installation, pull the cable. Make sure that
the camera unit does not move by fixing it to the
bracket with the cable tie.
English _17
Advertisement
Table of Contents
