Samsung ML-2550 User Manual page 64

3
Item
Config Netware
IPX Frame Type
Reset Network
Default Set
Print Net CFG
Explanation
Values: Yes, No*
You can set this item only when you set
Netware to On. This item lets you
select whether or not you set the frame
type parameter.
If you select Yes, the IPX Frame Type
option appears on the display.
Values:Auto*,EN_8022,EN_8023,EN_II,
EN_SNAP
You can select this item only when you
set Config Netware to Yes. This item
lets you select IPX Frame Type.
• Auto:You can set the frame type
automatically.
• EN_8022: Select this value to use the
IEEE 802.2 frame type.
• EN_8023:Select this value to use the
IEEE 802.3 frame type.
• EN_II :Select this value to use the
ETHERNET II frame type.
• EN_SNAP:Select this value to use the
SNAP frame type.
This item reboots the network interface
card.
This item restores the factory default of
the network configuration. This setting
will only take effect after you have reset
the printer.
This item print a page showing the
network parameters you set.
U
SING THE
C P 3.21
ONTROL ANEL
3