Samsung ML-2550 User Manual page 148

Message
Memory Overflow
Outbin Full
Page Too Complex
Paper Empty
[Size] In [Tray]
Ready
Close Tray 1
Ready
Close Tray 2
Ready
Low Toner
Ready
Replace Cart
Status
The printer does not
have enough memory to
print the current job.
The output bin is full.
Too complicated data
was sent to the printer.
The displayed tray is
empty.
The Tray1 is open.
The Tray2 is open.
The toner cartridge in
your printer is nearly
empty.
The life of some parts on
the toner cartridge ends.
Do this...
The job will be automatically
cleared and the printer will
return to ready mode.
• Expand the memory in your
printer. See"Installing Memory
DIMM" on page F.3.
It can hold up to 250 sheets of
paper. Once the paper is
removed from the output bin, the
printer resumes printing.
Simplify the page layout and
remove unnecessary graphics
from your document.
If the message persists, expand
the memory in your printer. See
"Installing Memory DIMM" on
page F.3.
Load the corresponding size of
paper into the tray.
Close the Tray1 to clear the
message.
Close the Tray2 to clear the
message.
Redistribute the toner, referring
to page 6.4.
The overflow of the waste toner
contaminates the inside of the
machine.
Regardless of the remaining
toner, this is warning message
showing that The toner cartridge
replacement is needed as the
parts life there of is exhausted. the
toner cartridge is at the end of its
life and the print quality lowers,
You need to replace
the cartridge to new one. to con-
tinue printing, press On Line/
Continue each time you print a
page.
S P
OLVING ROBLEMS
7
7.21