Samsung ML-2550 User Manual page 200

Setting Network Protocols
When you first install the printer, all supported network
protocols are enabled when you turn the printer on. If a network
protocol is enabled, the printer may actively transmit on the
network even when the protocol is not in use. This may increase
network traffic slightly. To eliminate unnecessary traffic, you can
disable unused protocols.
1
In ready mode press the Menu button (
"Network" on the bottom line of the display.
2
Press the Enter button (
3
Press the scroll button (
displays on the bottom line. Press the Enter button (
4
Press the scroll button (
press the Enter button (
button ( ).
5
Press the scroll button (
protocol on the bottom line.
You can choose AppleTalk or Netware.
6
Press the Enter button (
7
Press the scroll button (
"On" (enable) or "Off" (disable).
8
Press the Enter button (
9
Press the ON Line/Continue button (
ready mode.
) to access the menu.
or ) until "Config Network"
or ) to display "Yes" and
). Then press the Upper Level
or ) until you see the desired
).
or ) to change the setting to
) to save the selection.
) to return to
U Y P
SING OUR RINTER ON A
) until you see
).
N E.7
ETWORK
E