11
Press the Enter button (
menu.
IP address consists of 4 bytes.
Enter a number between 0
and 255 for each byte.
12
Press the scroll button (
between 0 and 255 and press the Enter button (
13
Repeat Step 12 to complete the address from the 1st byte
to the 4th byte.
14
To select other parameters, such as Subnet Mask or
Gateway, press the Upper Level button (
scroll button (
15
Repeat steps 12 and 13 to configure the other TCP/IP
parameters.
16
Press the ON Line/Continue button (
ready mode.
Dynamic Addressing (BOOTP/DHCP)
To assign the TCP/IP address automatically by the server, take
the following steps:
1
In ready mode press the Menu button (
"Network" on the bottom line of the display. Press the Enter
button (
) to access the menu.
2
Press the Enter button (
displays on the bottom line.
3
Press the scroll button (
press the Enter button (
4
press the Upper Level button (
button (
).
5
Press the Enter button (
) to access the IP Address
or
) to enter a number
or
). Press the Enter button (
) when "Config Network"
or
) to display "Yes" and
).
), then use the scroll
) when "Config TCP" displays.
U
Y
P
SING
OUR
RINTER ON A
).
), then use the
).
) to return to
) until you see
N
E.9
ETWORK
E