Panasonic CF-74ECBGDBM Service Manual page 32

Arranging the TP Power Cable and Attaching the TP/LCD Sheet
Ensure the Tape does not cover the Connecter port.
Safety Working
Match the end of the Sheet
to the end of the Connecter.
Sheet
Ensure the Tape and Cable Sheet
do not come out of the metal part.
Safety Working
Setting the Inverter and Arranging the Inverter Cable
1. Insert the Inverter to the Inverter Case, and connect the Inverter Cable to the Connector on the Inverter.
2. Fix the Connector of the Inverter Cable using the Tape.
Attach the Inverter on
the two-sided tapes.
Match the end of the Inverter
to the mark.
Tape
Safety Working
Pass the Cables through the notch.
Pass the Cable between the LCD and the Inverter Case.
Tape
0~1mm
Fold it back and fix it.
Connect the Connector.
0~1mm
0~2mm
0~2mm
Tape
Fold it back and attach
to the side suface.
Safety Working
Inverter
Case
Inverter Cable
TP Power Cable
Pass the Cables over
the Conductive Cloth.
Safety Working
Corner of the Conductive Cloth.
No protrusion.
A B
Arrange the Cable A and B
coming out of the Connector
part in the same length.
Inverter
1. Avoid any kink, twist or stress on the components.
2. Do not reuse the Inverter once you removed it
from the Inverter Case.
Inverter Case
Match the end of
the Inverter Case
to the end.
Fit the surplus length
under the LCD.
Ensure the portion with
Safety Working
the Black Tape stays on
the outlet.
9-10
Cable Sheet
Safety Working
Safety Working
Ensure the Cables do not
come over the "a" line.
(Otherwise they push up
the front surface.)
"a" line