Panasonic CF-74ECBGDBM Service Manual page 31

Arranging the LCD/TS Cable
1. Connect the LCD/TS Cable (LCD) to the Connector on the LCD Unit.
2. Connect the LCD/TS Cable (TS) to the Connector (CN603) on the TS PCB.
B: Attaching the Cloth
Cushion
Cloth
Attach the Cloth along
the surface of
the Cushion.
Match the end of
the Cloth to the end
of the Cushion.
Fold it back and attach to the side surface.
Ensure the Cloth is surely
attached to the metal
chassises on both of the
side and top.
(The Cloth should catch
the metal chassieses only.
It must not catch the TAB.)
Cushion
A
A
A: Match the Cloth by Cushion edge 0~1mm
Cloth
B
3~5mm
LCD Unit
Cloth
95~100mm
Cloth
Attach the Cloth
along the surface
of the Cushion.
Match the end of the Tape to the end of the EMI Sheet.
Safety Working
Turn them halfway.
*Avoid too much tension
on the Cables.
TS PCB
LCD/TS Cable
Before attaching the EMI Sheet,
attach the Tape.
Cloth
Ensure it does not come out
of the metal part.
Use the Cable covered
with the Conductive Cloth only.
0~2mm
Corner of the Cloth
Ensure the corner of the Cloth
does not come out of the LCD's edge.
Safety Working
9-9
Cloth
B
Tape
Cover the
Connector
Terminals
using the Tape.
EMI Sheet
Cloth