Setting-Up The Projector; Positioning; Room Light; Ventilation - Sanyo PLC-SP20 Owner's Manual

Hide thumbs Also See for PLC-SP20:
Table of Contents

Advertisement

POSITIONING:

ROOM LIGHT

Ideally the projector should be placed in a
room with limited light. Picture quality will
be directly affected by lighting conditions.
Max. Zoom
Screen Size
Min. Zoom
Distance
30"
Screen Size
(W x H) mm
610 x 457
Height (H1)
434mm
Height (H2)
23mm

VENTILATION

This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
¡Do not cover the vents with papers or other materials.
¡Keep the rear grill at least 1m away from any object.
¡Make sure that there are no objects under the projector.
An object under the projector may prevent the projector
from taking the cooling air through the bottom vent.

SETTING-UP THE PROJECTOR

¡This projector is basically designed to project on a flat projection surface.
¡This projector can be focused from 1.4 m ~ 10.8 m.
¡Use the illustration below as an example when positioning the projector to the screen.
60"
40"
46"
30"
40"
60"
30"
46"
1.4m
2.2m
60"
100"
1219 x 914
2032 x 1524
868mm
1448mm
46mm
76mm
Maximum Zoom
Minimum Zoom
150"
100"
115"
77"
DISTANCE
100"
150"
77"
115"
3.6m
5.4m
150"
3048 x 2286
4064 x 3048
2172mm
114mm
AIR INTAKE VENT
(BOTTOM SIDE)
– 8 –
250"
200"
192"
154"
200"
250"
154"
192"
7.2m
9.0m
200"
250"
5080 x 3810
2896mm
3620mm
152mm
190mm
EXHAUST VENT
(REAR SIDE)
300"
231"
H1
H2
300"
231"
10.8m
300"
6096 x 4572
4343mm
229mm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-sp20e

Table of Contents