Table of Contents
Advertisement
COLOUR SYSTEM SELECT (VIDEO MODE)
This projector is compatible with the five major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43 and PAL-M
(COLOUR SYSTEMs). It automatically adjusts itself to optimize its performance for the incoming video (Except PAL-M).
However, if the video signal is not strong enough to detect the video format, the projector may not reproduce the proper
video image. In case this happens, this projector allows you to choose a specific broadcast signal format.
1. Connect the video equipment to the PROJECTOR, and turn them on projector first.
2. Set MODE SELECT to "VIDEO MODE".
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT (REAR CLICK) BUTTON. Another
dialog box COLOUR SYSTEM DISPLAY will appear. The current COLOUR SYSTEM is displayed in the system window.
5. Press the POINT DOWN BUTTON and a red arrow will appear.
6. To change the current COLOUR SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a desirable
system and then press the SELECT (REAR CLICK) BUTTON.
7. The setting changed remains effective until the MAIN ON/OFF switch is turned off.
MAIN MENU DISPLAY
COLOUR SYSTEM
DISPLAY
– 31 –
Advertisement
Table of Contents
