Table of Contents
Advertisement
Model PLC-SP20E
Your projector uses nominal input voltages of 200-240 VAC. The
projector automatically selects the correct input voltage. The
projector is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not
sure what type of power is supplied to your building.
Model PLC-SP20
Your projector uses nominal input voltages of 110-120 VAC. The
projector automatically selects the correct input voltage. The
projector is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not
sure what type of power is supplied to your building.
POWER REQUIREMENTS
– 6 –
Connect the AC power supply cord (supplied)
to the projector.
The socket-outlet must be near this equipment
and must be easily accessible.
Advertisement
Table of Contents
