Filter Pump Motor Disassembly - Intex PureSpa SB-H10 Owner's Manual

FILTER PUMP MOTOR DISASSEMBLY

If there is a need to replace the filter motor (for qualified technician only), follow below steps to
disassemble it:
IMPORTANT: You must drain out any remaining water inside the piping system of the control base
before replacing any parts.
Tools required: One adjustable wrench and one Philip screwdriver.
1
4
NOTE: The "special wrench tool" is included with the new filter pump motor replacement and not
with the spa set.
S AVE THESE INSTRUCTIONS
(347PO) SPA ENGLISH 7.5" X 10.3" PANTONE 295U 05/21/2020
2
5
347
English
PO
3
6
Page 23