Specifications - JVC DLA-NX5 Instructions Manual

Specifications

Product Name
Model Name
Display Panel/Size
Projection Lens
Light-source Lamp
Screen Size
Brightness
Projection Distance
Input Compatibility Signal
Display Resolution
Input Terminal HDMI Input
Output Terminal Trigger Terminal
3D synchro
Control Terminal RS-232C Terminal
LAN Terminal
Service Terminal
Power Requirements
Power Consumption
Operation Environment
Installation Height
Dimensions (Width x Height x Depth)
Mass
Accessories
*1 D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
*2 D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3 During 3D playback, the display resolution is 4096 x 2160 pixels.
*4 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input
terminal may not be displayed in some cases due to changes in the HDCP specifications.
*5 Exclusively for firmware update.
*6 The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
*7 "During standby" refers to Eco Mode standby (P. 61).
Design and specifications are subject to change without prior notice.
0
Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
0
to aid comprehension. Images may differ from the actual product.
D-ILA Projector
DLA-NX9B, DLA-NX7B, DLA-NX5B
D-ILA device *1, 2
0.69" 4K D-ILA (4096 x 2160 pixels) x 3
2.0 x power zoom lens, motorized zoom and focus
265 W ultra-high pressure mercury lamp [product no.: PK-L2618U
Average lifespan: 4500 hours ("Low" mode)
Approx. 60" to 280" (Aspect ratio of 16:9) k
Approx. 60" to 200" (Aspect ratio of 16:9) l m
2200 lm k, 1900 lm l, 1800 lm m
Refer to P. 79.
Refer to P. 83.
8192 x 4320 pixels k *3, 4096 x 2160 pixels l m
Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *4
Single, Ø 3.5 mm DC Power Jack (E)
DC OUT 12 V, 0.1 A
Dedicated terminal for 3D Synchro Emitter (single, mini-DIN 3-pin)
Single, D-sub 9-pin (male) (external control)
Single, RJ-45 plug, 10BASE-T/100BASE-TX
SERVICE Single (USB Type A) *5
AC 100 V to 240 V, 50 Hz/60 Hz
400 W (during normal standby: 1.5 W *6, during Eco Mode standby:
0.3 W *7)
Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60°C
Below 5,000 ft (1,524 m)
500 mm x 234 mm x 518 mm (19-3/4 in x 9-1/4 in x 20-3/8 in) (including
feet) k
500 mm x 234 mm x 495 mm (19-3/4 in x 9-1/4 in x 19-1/2 in) (including
feet) l m
21.8 kg (48 lb) k, 19.8 kg (43.6 lb) l, 19.6 kg (43.2 lb) m
Refer to P. 9.
77