Mask; Anamorphic; Installation Style - JVC DLA-NX5 Instructions Manual

Mask

For hiding the peripheral area of the image with a mask (black strip).
Setting
Off
On
Off
"Top" / "Bottom" / "Left" / "Right"
For specifying the ranges to hide by masking (with black strips).
Setting range: 0 to 220
0

Anamorphic

Configure this setting when an anamorphic lens is used.
Setting
Off
A
B
C
Screen Adjust
By selecting the optimal correction mode according to the characteristics of the screen in use, corrections can be
performed to reproduce natural images with balanced colors.
Æ "Setting Screen Correction" (P. 25)

Installation Style

For setting to "Front", "Ceiling Mount (F)", "Rear", or "Ceiling Mount (R)" according to the installation status of the
projector.
"Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to the screen.
0
"Rear" or "Ceiling Mount (R)" is set when projector is installed in the rear with respect to the screen.
0
Not masked.
Hides the ranges specified in "Top", "Bottom", "Left" and "Right" by masking (with
black strips).
Projects the 2.35:1 image without any changes.
Projects the 2.35:1 image with it stretched in the vertical direction only using a 3840
pixel width.
Projects the 16:9 image with it compressed in the horizontal direction only.
Projects the 2.35:1 image with it stretched in the vertical direction using full 4096
pixel width.
Description
On
Mask: black strip around the
periphery
Description
59