Huawei APAA00001 User Manual page 9

APAA00001
User Manual
(4) Power supply indicator
(7) Power button
Table 1-2 Ports on APAA00001
No.
1
2
3
4, 5,
and 6
7
8
9
Table 1-3 Indicators
No.
4
5
6
Draft A (2015-06-12)
(5) Communication indicator
(8) Mini USB port
Port Description
AISG connection Connects the PAA to an ALD using an AISG cable.
port
Strap hole Used to fasten straps so that the PAA can be carried easily.
OOK connection Connects the PAA to an ALD using an RF cable.
port
Indicators Indicate the power supply, communication, and alarm
status of the PAA. For details, see Table 1-3
Used to power on or off the PAA. The PAA can be
Power button
powered on or off by holding down this button.
Mini USB port Reserved for further development and is not used
temporarily.
12 V DC adapter Connects to the AC/DC adapter. When an AC/DC adapter
port is connected, the PAA automatically uses the input power
supply as the operating power supply to charge the
integrated battery.
Indicator and
Silkscreen
Power indicator (PWR)
Communication
indicator (COM)
Alarm indicator (ALM)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the power supply state. The indicator has
four working status:
 Steady green: The PAA has sufficient battery
power.
 Steady yellow: The PAA has moderate battery
power.
 Steady red: The PAA has low battery power.
 Blinking at the frequency of 1 Hz: The battery
inside the PAA is being recharged.
The indicator blinks when the mobile app has been
successfully connected to the PAA and
communication is proper.
The indicator is steady red when the PAA generates an
alarm.
1 Introduction to PAA
(6) Alarm indicator
(9) 12 V DC adapter port
4