Related Manuals for Blomberg LBF16230W
Summary of Contents for Blomberg LBF16230W
- Page 1 Washing Machine User Manual LBF16230W Document Number : 2820528530_EN/ 23-07-20.(10:20)
- Page 2 Please read these instructions first before using your appliance Dear Customer, Thank you for choosing a Blomberg appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
-
Page 3: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. Door can be This section includes security opened a few minutes after the instructions which may help prevent washing cycle ends. In case the injuries and material damage risks. of forcing the loading door to All kinds of warranties shall be invalid if open, the door and the lock... -
Page 4: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •... -
Page 5: Important Instructions For Environment
This product has been manufactured with high DANGER! quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 6: Technical Specifications
4 Technical specifications Supplier name or trademark Blomberg LBF16230W Model name 7139843200 Rated capacity (kg) Maximum spin speed (rpm) 1200 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) -
Page 7: Appropriate Installation Location
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's... -
Page 8: Connecting The Drain Hose To The Drain
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. -
Page 9: Electrical Connection
4.1.7 Electrical connection Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock Connect the product to a grounded outlet hazard if inserted into a socket elsewhere in protected by a 13 A fuse. Our company shall the house. -
Page 10: Sorting The Laundry
4.2 Preparation Transportation of the product 1. Unplug the product before transporting it. 4.2.1 Sorting the laundry 2. Remove water drain and water supply • Sort laundry according to type of fabric, connections. color, and degree of soiling and allowable 3. -
Page 11: Loading The Laundry
4.2.3 Tips for energy and water saving The detergent drawer Following information will help you use the product is composed of three in an ecological and energy/water-efficient manner. compartments: • Operate the product in the highest load capacity allowed for the programme you –... -
Page 12: Using Starch
Adjusting detergent amount If the product does not contain a liquid detergent cup: The amount of washing detergent to be used depends on the amount of laundry, the degree • Do not use liquid detergent for the prewash of soiling and water hardness. in a programme with prewash. -
Page 13: Tips For Efficient Washing
• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistence, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the machine continues taking in water, add decolorant in the same compartment. -
Page 14: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 15 • : Selectable * : Automatically selected, cannot be cancelled. ** : Classic ( ) is the test programme in accordance with EN 60456:2016 and energy label with Commission Delegated Regulation (EU) 1061/2010 ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/prA:2019 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load.
-
Page 16: Main Programmes
4.3.5 Main programmes • Classic Depending on the type of fabric, use the Use to wash your normally soiled, durable following main programmes. cotton and linen laundry. Although it washes longer than all other programmes, it provides • Cottons high energy and water savings. Actual water You can wash your durable cotton laundry temperature may be different from the stated (sheets, bedlinen, towels, bathrobes, underwear... - Page 17 If you only want to drain the water without Shirts • spinning the laundry, select the “Spin+Pump Use this programme to wash shirts made of programme, and use the Spin Speed cotton, synthetic and synthetic blended fabrics Adjustment button to select the No Spin together.
-
Page 18: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
4.3.10 Auxiliary function selection 4.3.10.2 Functions/Programmes Select the desired auxiliary functions before Selected by Pressing the Function starting the programme. You can also select Buttons for 3 Seconds or cancel auxiliary functions suitable for the • Machine Care running programme without pressing the Start/ To select this programme, press and hold the Pause button while the machine is operating. - Page 19 To disable Child Lock: 4. Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown Press and hold the Auxiliary Function button 2 will start for delayed end. On the display, “_” will for 3 seconds while the programme is running. move up and down next to the delayed end time.
-
Page 20: Progress Of Programme
4.3.13 Progress of programme 4.3.15 Changing the selections Progress of a running programme can be after programme has started followed from the Programme Follow-up Switching the machine to pause mode indicator. At the beginning of each programme Press the Start/Pause to switch the machine step, the relevant indicator light will turn on. -
Page 21: Maintenance And Cleaning
4.4 Maintenance and cleaning 4.3.16 Cancelling the programme To cancel the programme, turn the Programme Service life of product extends and frequently Selection knob to select another programme. experienced problems will be reduced if it is Previous programme will be cancelled. End/ cleaned at regular intervals. -
Page 22: Cleaning The Body And Control Panel
4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause solid items such as buttons, coins and fabric rust stains in the drum. Clean the fibres clogging the pump impeller during stains on the drum surface by using discharge of washing water. -
Page 23: Troubleshooting
5 Troubleshooting 3 Follow the below procedures in order to drain water. Program does not start after closing the door. The product has an emergency water draining • Start / Pause / Cancel button was not pressed. >>>*Press hose, in order to drain the water: the Start / Pause / Cancel button. - Page 24 Machine directly discharges the water it takes in. Machine does not switch to spinning step. (*) • Draining hose might not be at adequate height. • There might be unbalanced load in the machine. >>>Connect the water draining hose as described in the >>>Automatic unbalanced load detection system might operation manual.
- Page 25 Colour of the clothes faded. (**) • There is a problem with the detergent drawer valves. >>>Call the Authorised Service Agent. • Excessive laundry was loaded in. >>>Do not load the • Detergent might be mixed with the softener. >>>Do not machine in excess.
- Page 26 Accidental damage, misuse or abuse of a product. An attempted repair of a product by anyone other than a Blomberg Approved Engineer (the “Engineer”). Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.
- Page 27 11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Blomberg offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
- Page 28 You can register by first visiting blomberguk.com/register and by following the online instructions. All Blomberg appliances come with a 3 year parts and labour guarantee as standard. When you register your appliance for the Optima Inverter Motor 10 year guarantee, you are also registering your appliance for the standard 3 year parts and labour guarantee.
- Page 29 HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation available should the product require attention under guarantee. Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services.