Preparation; Filter Installation - Sharp EH-HS41 Manual

PREPARATION

FILTER INSTALLATION

To maintain the quality of the filters they are installed in the main unit and packed
in plastic bags. Be sure to remove the filters from the plastic bags before using
the unit.
1
Remove the filters
1
Remove the Back Panel.
Pull the tab at the top of the Back Panel.
2
Remove the Deodorizing Filter
and HEPA Filter from the plas-
tic bags.
2
Intall the filters
1
Place the HEPA Filter and Deodorizing Filer within the
main unit.
Do not install the HEPA filter backwards or the
unit will not operate properly.
2
Replace the Back Panel to the main unit.
3
Fill in the usage start date on the
Date Label.
KC-930TA.indd 26
Be sure to remove the power plug from the wall outlet.
Use the date as a guide for the filter replace-
ment schedule.
Date Label
E-6
Tab
09.9.30 2:22:57 PM