Yamaha DRIVE 2 SUPER HAULER 2019 Owner's/Operator's Manual page 48

MAINTENANCE
8
8-20
Before performing wheel or brake
maintenance, verify that the main
switch is in the "OFF" position.
Accidental starting of the vehicle
could cause the vehicle to move,
causing death or serious personal
injury.
Wheel Replacement
To remove and install a wheel on
your Super Hauler:
1. With the wheels blocked to
prevent the Super Hauler from
moving, loosen the wheel nuts.
2. Elevate the Super Hauler with a
Y-57
jack and remove the wheel nuts
and the wheel.
3. Reverse the removal steps when
installing the wheel.
Wheel nut tightening torque:
88 Nm, 8.8 m·kg (65 ft·lb)
Brake Adjustment
The brakes on your Super Hauler are
self-adjusting.
Before you operate the Super
Hauler, press down on the brake
pedal several times to make sure the
brakes are functioning properly.
Consult your Yamaha dealer before
using your Super Hauler if you
suspect brake problems. Brake
failure could result in a serious
accident. Death or serious personal
injury can result from failing to
comply with the safety instructions
in this manual.
J2F